ELECTRICAL ENGINEERING: Recent submissions

  • ECONOMIC DISPATCH FOR GENERATION COMPANY CONSIDERING WHEELING CHARGES 
    Buddhilal, Bhavsar Yashvant (2007)
    Right from the beginning up to early 1990's, electric power supply industry was regulated by the government. Then this traditional vertically monopolistic structure of electric power supply industry has been deregulated ...
  • FPGA BASED DATA PROCESSOR FOR DISCHARC' MEASUREMENT USING PROPELLER CURRENT METERS 
    Uddin, Sirat Moin (2005)
    The dissertation focuses on the measurement of flow using propeller current-meters in open-channels. The propeller current meter, (an adaptation of turbine flow meter) is designed to measure the flow of water in the ...
  • DESIGN OF ROBUST POWER SYSTEM CONTROLLERS 
    Rao, Basam Venkata (2007)
    Power system is such a complex structure that it is not always easy to derive an exact model for it. These complexities in modeling leads to model errors which are also called as `model uncertainties'. If a controller is ...
  • SPEAKER DEPENDANT ISOLATED HINDI WORD RECOGNITION 
    D, Shankar Babu (2005)
    Although speech recognition products are already available in the market at present, their development is mainly based on statistical techniques which work under very specific assumptions. This thesis examines how artificial ...
  • CONDITIONING, DELINEATION & STATISTICAL ANALYSIS OF MULTI-CHANNEL ELECTROCARDIOGRAM 
    Sanyal, Sebanti (2005)
    Multi-channel ECG Signal is recorded at. the Institute of Biomedical Engineering, University of Karlsruhe on healthy volunteers. The aim of this project is to find out the pattern of variation of the QRS complex with varied ...
  • SIMULATION OF STATIC SYNCHRONOUS S.ERiES COMPENSATOR USING DIFFERENT INVERTER TOPOLOGIES 
    M., Srikanth Reddy (2007)
    This thesis describes about an active approach to the series line compensation, in which a synchronous voltage source implemented by a gate-turn-off thyristor (GTO) based voltage-sourced inverter, is used to provide ...
  • TRANSIT TIME FLOW METER APPLICATION TO CLOSED PIPES DEMANDING HIGH ACCURACY 
    Mandimala, Prem Vasantha Kumar (2005)
    Discharge (flow rate) measurement in hydro-power station is one complex measurement application which demands very accurate methods. For years together the accuracy of flow measurement remained unsatisfying, until the high ...
  • INDUSTRIAL SEQUENCERS FOR PROCESS CONTROL APPLICATIONS USING PETRI NETS AND LADDER LOGIC DIAGRAM 
    Maitra, Soumyajyoti (2007)
    Earlier hardwired electromechanical relays were used to realize and control discrete event systems, then a steep rise of the PLC was observed and today sequencing is normally implemented in software instead of relays. PLC's ...
  • CONDITION MONITORING AND ANALYSIS OF ROTATING MACHINES IN STEEL INDUSTRY 
    Mehta, Pramod (2005)
    In recent years, progress in large size machine and advance factory equipment has contributed to the improvement of productivity, product quality. On the other hand, once trouble occurs economic losses are very great, and ...
  • IMPLEMENTATION OF FILTERED BACKPROJECTION ALGORITHM ON FPGA 
    Rai, Shashank Sharan (2007)
    Recently, Field Programmable Gate Array (FPGA) technology has become a promising and viable platform for the implementation of image and video processing algorithms. The special features available with today's FPGAs have ...
  • IMAGE COMPRESSION USING MULTIWAVELET 
    Anand, Parate Avinash (2005)
    There are many methods for digital image compression that have been the subject of much study over the past decade & their success depends on how well the basic functions represent the signal features. Discrete wavelet ...
  • SYMPATHETIC TRIPPING OF DIRECTIONAL OVERCURRENT RELAYS IN POWER NETWORK 
    H. C., Rohith Kumar (2007)
    Protective relaying plays a vital role in optimum operation of electric power system. The relays detect the abnormal system conditions and act in a predetermined fashion to disengage the troubled area while continuing to ...
  • ONLINE FINGERPRINT VERIFICATION 
    Kumar, M. Bhushan (2005)
    Present day need of our society is to have an identification or verification system, which is fast and reliable. We have various biometrics based verification systems, but fingerprint verification system is one of the fast ...
  • MICROCONTROLLER BASED FREQUENCY RELAY 
    Pati, Jagdish (2005)
    Frequency is an important operating parameter of power system. Frequency of a power system remains constant if sum of all loads plus losses equals total generation in the system. However, frequency starts to decrease if ...
  • FAULT IDENTIFICATION USING NEURAL NETWORKS 
    Rangisetti, Praveen (2007)
    In this thesis the aim is to detect the high impedance fault occurring on radial electrical distribution systems using neural network based relaying scheme. A multilayer perceptron is used for distinguishing the linear and ...
  • SIMULATION AND MODELLING OF AE SENSORS FOR CHARACTERIZATION OF ELECTRICAL PARAMETERS 
    Vithalrao, Dharmapurikar Amit (2005)
    Acoustic Emission Analysis (AEA) is becoming increasingly popular among various Nondestructive Testing (NDT) techniques. Piezoelectric type sensors are widely used for Acoustic Emission (AE) measurements. A piezoelectric ...
  • FUZZY RELIABILITY ANALYSIS OF DISTRIBUTION SYSTEMS 
    Sekhar, M. Chandra (2007)
    Distribution system Reliability is one of the most important topics in the electric power industry due to its high impact on the cost of electricity and its high correlation with customer satisfaction. Distribution ...
  • VECTORCARDIOGRAM ANALYSIS IN LARVIEW 
    Verughese, Deepu C. (2005)
    In the present Thesis some, aspects of T-wave morphology are considered for characterization and quantification of heterogeneous repolarization, using the Vectorcardiogram (VCG) implemented in LabVIEW. The orthogonal Frank ...
  • PLC BASED FUZZY LOGIC CONTROLLER FOR SPEED 
    Jagubhai, Makwana Pratapbhai (2007)
    Basically, Programmable Logic Controller (PLC) consists of input/output, memory, CPU and power supply. PLC executes program like a microprocessor device and changes output condition after reading input status. PLC is widely ...
  • DEVELOPMENT OF AUTOMATIC PHASE PICKERS FOR BROADBAND DATA 
    Ahmed, Asif (2005)
    The aim of this work is to detect and accurately pick the onset time of P wave (primary wave) arrival in broadband seismograms. P-waves are the fastest kind of seismic waves, which reach the recording station first and ...