ELECTRICAL ENGINEERING: Recent submissions

  • PLC BASED TEMPERATURE CONTROL USING PID CONTROLLER 
    Bhatt, Yogesh Chandra (Department of Electrical Engineering,IITR., 2016-05)
    Temperature is a very important quantity, especially in the process industries all big plant like chemical plant, steel plant for them monitoring of tempera- ture is very important. So temperature controller are needed ...
  • Design of Robust controller for Robotic arm 
    K P, Nikhil (Department of Electrical Engineering,IITR., 2016-05)
    The development of automation in the industries involves the use of robots. This increases the productivity in a fast and accurate .which in terms increases the quality of products. There are many researches are going on ...
  • DEVELOPMENT OF MPPT SYSTEM FOR VARYING ATMOSPHERIC CONDITIONS 
    K., Sanjay Krishna (Department of Electrical Engineering,IITR., 2016-05)
    Solar Photovoltaic (SPV) energy is one of the most prominent energy source as it is clean, pollution free and inexhaustible. However, it is less efficient. In order to improve the efficiency maximum power has to be extracted ...
  • PERFORMANCE ANALYSIS OF TRANSFORMER-LESS INVERTER FOR SOLAR POWER CONVERSION 
    Verma, Rohit (Department of Electrical Engineering,IITR., 2016-05)
    Solar energy is the most emerging renewable energy. Applications of solar energy are increasing for both gird connected and standalone system. Much more efforts have been made on the integration of renewable energies in ...
  • OPTIMAL RELAY COORDINATION WITH DISTRIBUTED GENERATION USING ARTIFICIAL INTELLIGENCE ALGORITHM 
    Chawla, Astha (Department of Electrical Engineering,IITR., 2016-05)
    Due to dependency on Plug Setting (PS), Time Dial Setting (TDS), size of the network, more than one back-up relays for one primary relay and other technical constraints, coordination of Directional Overcurrent Relays (DOCRs) ...
  • BUSBAR PROTECTION USING RANDOM FOREST TECHNIQUE 
    Narayan, Nidhi (Department of Electrical Engineering,IITR., 2016-05)
    The busbar, where all the lines converge, is very critical element of a power system. Faults on busbar can lead to disturbances and major shut down of power system. On other hand, the unwanted isolation of busbar leads to ...
  • CONDITION MONITORING AND PROTECTION OF TRANSMISSION LINE USING PMU 
    Navendu (Department of Electrical Engineering,IITR., 2016-05)
    Naive Bayes (NB) Classifier has been implemented for fault detection and type of fault classification in transmission line. The Naïve Bayes classifier is based on Bayes conditional probability theorem. Synchronized fault ...
  • ADAPTIVE ESTIMATOR-CONTROLLER FOR SINGLE LINK FLEXIBLE MANIPULATOR 
    Tomar, Shikha (Department of Electrical Engineering,IITR., 2016-05)
    A vibration frequency estimator based on moving-window discrete Fourier transform (MWDFT) integrated with frequency locked loop (FLL) is proposed for the vibration mode estimation of single-link exible manipulator ...
  • DEVELOPMENT OF VIRTUAL REALITY ENVIRONMENT FOR COGNITIVE ENHANCEMENT 
    Singh, Vishal V (Department of Electrical Engineering,IITR., 2016-05)
    Cognitive enhancement has received considerable attention during the last decade, both in the general public and in academic discourse. Cognitive Enhancement refers to use of any intervention directed at improving any ...
  • ANALYSIS OF VOLTAGE DISTRIBUTION IN POWER TRANSFORMER WINDINGS DURING VERY FAST TRANSIENT OVER-VOLTAGES 
    Bhargava, Saurabh (Department of Electrical Engineering,IITR., 2016-05)
    In this work, the non-linear voltage distribution in transformer winding is in- vestigated that occurs due to switching and lightning. The major factors that contribute to premature insulation failure are lightning/line ...
  • GENERALIZED THREE PHASE UNBALANCED LOAD FLOW WITH RENEAWALE GENERATIONS 
    Singh, Udit Kumar (Department of Electrical Engineering,IITR., 2016-05)
    The technique for the power flow solution of the distribution system with renewable generation is presented in this paper work. The load flow problem is solved by the methods one is direct approach for distribution system ...
  • ENHANCED ADAPTIVE CARRIER TRACKING LOOP FOR GNSS RECEIVER 
    Mishra, Adarsh (Department of Electrical Engineering,IITR., 2016-05)
    MATLAB-Simulink is useful tool to analysis the signal processing part of GNSS receiver. Carrier tracking loop (CTL) used in GNSS receiver are closed loop systems, designed from their continuous time transfer function. ...
  • PERFORMANCE EVALUATION OF LOSS OF GRID AND ITS PROTECTION 
    Gupta, Akash (Dept. of Electrical Engineering IITR, 2016-05)
    This thesis presents a passive based method islanding detection for distribution generation network connected to a utility grid. The passive technique is based on change of voltage phase angle at the point of common coupling ...
  • LOCATION OF FAULTED LINE SECTION IN DISTRIBUTION SYSTEM 
    Chhetija, Deepika (Dept. of Electrical Engineering IITR, 2016-05)
    To locate fault in power distribution system various methods are proposed which are iterative and time consuming in nature. Therefore, to speed up the restoration process and to improve reliability at consumer end a ...
  • STEADY STATE ANALYSIS OF REDUCED INDIAN POWER SYSTEM 
    Mitra, Arindam (Dept. of Electrical Engineering IITR, 2016-05)
    Due to ever increasing demand of electrical power along with penetration of renewable energy sources, a proper analysis have to be carried out to determine the effect of increased power transactions through existing ...
  • ADAPTIVE DISTANCE RELAY SETTING FOR PARALLEL TRANSMISSION NETWORK CONNECTING WIND FARMS AND UPFC 
    Joshi, Kamal (Dept. of Electrical Engineering IITR, 2016-05)
    An adaptive distance relay setting for parallel transmission lines when a unified power flow controller and wind farm are connected to a parallel transmission network. An ideal trip characteristic of distance relay is ...
  • ISSUES WITH GRID INTEGRATION OF RENEWABLE ENERGY SOURCES 
    Anand, Chirag (Dept. of Electrical Engineering IITR, 2016-05)
    When renewable energy sources are integrated into the existing power system, then they act as a bridge between the electricity demand and supply, in a sustainable and greener way. But this grid integration poses certain ...
  • Stability analysis of power system incorporating uncertainties 
    Kumar, Bipul (Dept. of Electrical Engineering IITR, 2016-05)
    First deterministic analysis for small signal stability analysis of power system has been done by finding eigenvalues of linearized differential equations of system. The stability and its dependence on various state ...
  • DEMAND SIDE MANAGEMENT IN SMART GRID 
    Bansal, Nikki (Dept. of Electrical Engineering IITR, 2016-05)
    Demand side management (DSM) is one of the important functions in a smart grid that allows customers to make informed decisions regarding their energy consumption, and helps the energy providers reduce the peak load ...
  • WIDE AREA MONITORING AND PROTECTION 
    Chandak, Sidharth (Dept. of Electrical Engineering IITR, 2016-05)
    Smart grid technology requires intelligent and e cient monitoring of power system net- work in control centers to prevent unwanted power system blackouts. With recent tech- nological developments, it is now feasible to ...