ELECTRICAL ENGINEERING: Recent submissions

  • Saini, Kalpana (Dept. of Electrical Engineering iit Roorkee, 2013-06)
    The present thesis deals with the research work carried out for the automatic severity evaluation of the mitral regurgitation (MR). MR is a common heart valve disorder. In present days, the clinicians carry out this task ...
  • Nisha, M. Germin (Dept. of Electrical Engineering iit Roorkee, 2014-03)
    One among the advanced control algorithms that is receiving a great deal of concern in the process industries, chemical plant and oil refineries is predictive control. Predictive control is a prudent control which retains ...
  • Gupta, Neeraj (Dept. of Electrical Engineering iit Roorkee, 2014-12)
    Owing to the great proliferation of intermittent generation (wind, solar) in power grid, open access system, deregulation and competitive power markets, the power system operation has become uncertain. Generally, the ...
  • Sambariya, Dhanesh Kumar (Dept. of Electrical Engineering iit Roorkee, 2015-03)
    Modern power systems are large, complex and multi-component dynamic systems being prone to fluctuating characteristics with varying generation schedules and loads. These power systems suffer with small signal oscillations ...
  • Gupta, Deep (Dept. of Electrical Engineering iit Roorkee, 2014-11)
    In the field of medical imaging technologies, ultrasound imaging (US) has an important role in the diagnosis of several diseases because of its safe application for patients, low cost and portability. In usual, the ...
  • Sharma, Charu (Dept. of Electrical Engineering iit Roorkee, 2014-10)
    For secure and reliable operation of an interconnected power system, it is required to monitor wide area system and its stability in real time. The recent development of synchro phasor technology has brought a paradigm ...
  • Singh, Amit Kumar (Dept. of Electrical Engineering iit Roorkee, 2014-07)
    Distillation is defined as a process in which a liquid or vapor mixture of two or more substances is separated into its component fractions of desired purity, by the application and removal of heat. The objective of present ...
  • Sharma, Ajay Shiv (Dept. of Electrical Engineering iit Roorkee, 2014-07)
    Bioinformatics and computational systems biology fuses several branches of applied sciences and applied engineering and interplay that exploits basic sciences such as mathematics, physics, chemistry, computer science ...
  • Dave, Vikramaditya (Dept. of Electrical Engineering iit Roorkee, 2015-01)
    High voltage insulators are the backbone of any power system network. They can be defined as the devices which are used on transmission lines, transformers and distribution substations to support, separate or contain ...
  • D., Sreenivasrao (Dept. of Electrical Engineering iit Roorkee, 2013-07)
    In present day distribution systems, major power consumption has been in reactive loads, such as motor drives, fans, pumps and power electronic converters. These loads normally draw lagging power factor currents and ...
  • Makwana, Jignesh Ashokbhai (Dept. of Electrical Engineering iit Roorkee, 2013-06)
    The Switched Reluctance Motor (SRM) offers significant benefits over conventional AC and DC motors which include higher efficiency over wide speed range operation and under partial loading. Even though it exhibits high ...
  • Vilas, Kulkarni Tushar (Department of Electrical Engineering,IITR., 2015-11)
    GIS is preferred to AIS now a days because it has many advantages over it viz. small space requirement, better insulation strength etc. Main components of GIS include electrical bus bars, circuit breakers, current ...
  • Thomas, Amal (Department of Electrical Engineering,IITR., 2016-05)
    Power Quality (PQ) is used to describe the electrical phenomenon manifested in terms of variations in current, voltage and/or frequency that produce undesirable effects in the power system. The growing interest in the ...
  • Niranjan, Alok (Department of Electrical Engineering,IITR., 2016-05)
    Variable speed operation of IM drives can be generally classified as scalar control and vector control. Scalar control is used for low performance drives where only the magnitude and frequency of stator voltage or current ...
  • Sarkar, Gautam (Department of Electrical Engineering,IITR., 2016-05)
    The upsurge in demand of energy has been accentuated by industrial drives system, domestic appliances etc. The drive system and many household/domestic equiments has to its core semiconductor based switches. The very ...
  • Srivastava, Ashish (Department of Electrical Engineering,IITR., 2016-06)
    This Thesis presents a photovoltaic supply system fed multilevel inverter for pump load with common mode voltage elimination, the cascaded MLI topology is needed only 12 switches and no extra clamping devices required ...
  • Renathi, Meda (Department of Electrical Engineering,IITR., 2016-05)
    This dissertation report describes the investigation of sensor less control methods of Induction machines for low speed operation. Requirement of low cost, low maintenance, robust electrical motors has resulted in ...
  • Tiwari, Manish (Department of Electrical Engineering,IITR., 2016-05)
    This dissertation comprises the process of monitoring the performance of solar panel with the application of MPPT under different meteorological conditions, buck boost converter and a nonideal condition of partial shading ...
  • Tak, Neha (Department of Electrical Engineering,IITR., 2016-05)
    The continuous increase in power demands and need for a cleaner environment makes decentralized renewable energy production, like solar and wind, more and more interesting. Decentralized energy production using solar ...
  • Munshi, Mintu (Department of Electrical Engineering,IITR., 2016-05)
    It has become a common practice for the industry to use vector control technique in induction motor control.In this method stator current space vector is decoupled into two components in synchronously rotating reference ...