PER ACID BLEACHING OF KRAFT PULP

Kumar, Ajay

dc.contributor.author	Kumar, Ajay
dc.date.accessioned	2014-10-05T11:59:03Z
dc.date.available	2014-10-05T11:59:03Z
dc.date.issued	1998
dc.identifier	M.Tech	en_US
dc.identifier.uri	http://hdl.handle.net/123456789/4206
dc.guide	Kumar, Satish
dc.description.abstract	Per acids may prove viable for use in ECF and TCF bleaching sequences.In the present study the peracetic acid was used as a delignifying agent . Peracetic acid was used to delignify the oxygen treated and untreated pulp in ECF & TCF sequences. A comparison was done between Peracetic acid delignification and conventional Oxygen delignification stage. The results indicates that the extent of delignification by Pa stage is lower than 0 stage. The 0 stage gives brightness, viscosity equivalent to Pa stage followed by Eop stage. However the COD load of 0 stage was found higher than Pa stage. P stage or D 9- stage used after Pa Eop stages improved the brightness by 14-20 points and after 0 Pa stages by 13-14 points with reduction in pulp viscosity by 14-20% and 30 % respectively.	en_US
dc.language.iso	en	en_US
dc.subject	PULP	en_US
dc.subject	ACID	en_US
dc.subject	ECF	en_US
dc.subject	TCF	en_US
dc.title	PER ACID BLEACHING OF KRAFT PULP	en_US
dc.type	M.Tech Dessertation	en_US
dc.accession.number	248017	en_US