• ENERGY STORAGE CERAMICS: SYNTHESIS AND CHARACTERIZATION 

  GUPTA, ABHISHEK KUMAR (IIT Roorkee, 2021-03)

  In today’s era, where the world is moving towards miniaturization, light weight, cheaper electronics, easy integration etc., high energy density dielectric capacitors are essential to increase its volumetric efficiency. ...
• SYNTHESIS AND CHARACTERIZATION OF LiFePO4/CPOLYMER CATHODE MATERIAL FOR Li-ION BATTERY 

  Sehrawat, Rajeev (IIT ROORKEE, 2015-07)

  Due to the economic liability of fossil fuels and increasing global warming concerns, it is required to develop alternative renewable and clean energy sources (such as solar, wind, and hydroelectric power) intensively ...
• BENEFICIATION STUDIES OF BANDED IRON ORES 

  Rayapudi, Veeranjaneyulu (I I T ROORKEE, 2019-08)

  The present work investigates the utilization/beneficiation of low-grade iron ores to meet the steel vision 2030 of 300MT steel production. Due to limited rate of crude steel production and depletion of high-grade iron ...
• PHASE TRANSFORMATIONS IN INTERSTITIAL FREE AND LOW DENSITY STEELS 

  Sinha, Mrinmoy (I I T ROORKEE, 2019-08)

  The interstitial-free (IF) steel is extremely soft and ductile. The strengthening is the key focus of the present study by heat treatment. The samples have been soaked in the austenitic temperature domain followed by ...
• CARBON NANOFILLER MODIFIED CARBON FIBER EPOXY COMPOSITE FOR STRUCTURAL APPLICATION 

  Bisht, Ankita (I I T ROORKEE, 2019-07)

  Carbon fiber (CF) reinforced epoxy composites are the most widely used fiber reinforced polymer composites (FRPs) in aerospace, automobiles, lightweight structures and many other industries. Properties, like, high strength ...
• SYNTHESIS OF GRAPHENE USING PULSED LASER DEPOSITION AND ITS CHARACTERIZATION 

  Kumar, Pramod (IIT Roorkee, 2019-01)

  Graphene is the two-dimensional carbon material which has gained strong research interest for more than last one decade owing to its unique properties which make it a promising material in a large number of potential ...
• EFFECT OF CRYO-FSP ON MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF STIR CAST Al7075-SiCP NANOCOMPOSITES 

  Kumar, Atul (IIT Roorkee, 2019-05)

  Over the years, aluminum matrix composites (AMCs) have become the subject of extensive research because of possibility to achieve outstanding properties such as high strength to weight ratio, high stiffness, superior wear ...
• MATERIAL FLOW ANALYSIS IN FRICTION STIR WELDING OR PROCESSING 

  Kumar, Rahul (IIT Roorkee, 2019-02)

  Material flow in friction stir welding (FSW) process is a complex phenomenon, understanding of which plays a significant role in getting defect free weld. Additionally, quantification of the material flow characteristic ...
• DEVELOPING POLYMER BASED SURFACE MODIFIED COMPOSITE FOR DRUG ELUTING ORTHOPEDIC IMPLANTS 

  R, Manoj Kumar (IIT Roorkee, 2019-07)

  Osteoarthritis is a degenerative joint disease, caused due to wear and breaking down of the bone cartilage in a joint. Prosthetic joint replacement is the only solution after all non-surgical treatments fail to resolve the ...
• MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POWDER FORGED Fe-P ALLOYS 

  Chaurasia, Shailesh Kumar (IIT Roorkee, 2018-09)

  Phosphorus (P) is an undesirable element in steels. During cold working, phosphorus induces cold shortness or brittleness due to which its content in modern steels is limited to < 0.04 wt. %. It has been seen that the ...
• THERMAL STABILITY AND MECHANICAL PROPERTIES OF Fe-Cr NANOSTRUCTURES PREPARED BY MECHANICAL ALLOYING FOLLOWED BY SPARK PLASMA SINTERING 

  Muthaiah, V.M.Suntharavel (IIT Roorkee, 2018-10)

  ron (Fe)-based alloys, especially, Fe-Cr alloys have wide variety of applications in various industries such as nuclear, construction, automotive, oil, gas etc. due to their superior strength and formability, high corrosion ...
• IMPRESSION CREEP AND HIGH CYCLE FATIGUE BEHAVIOUR OF ULTRASONICALLY PROCESSED INSITU Al6061-Al3Ti/Al3Zr COMPOSITES 

  Gupta, Rahul (IIT Roorkee, 2018-10)

  Engineering sectors demand materials with stringent combination of properties unattainable by conventional alloys. Particulate reinforced aluminium matrix composites (AMCs) are attractive materials for aerospace, marine ...
• SURFACE MODIFICATION OF MARTENSITIC STAINLESS STEELS FOR HYDROTURBINE BLADES 

  Prakash, Guru (IIT Roorkee, 2018-07)

  Hydropower stations are renewable, green and inexpensive source of power. The turbine is the main component in a hydropower station. The turbines are underwater components and operate in severe erosive condition. The blades ...
• DEVELOPMENT OF YTTRIUM / TiB2 REINFORCED AA2024 MATRIX COMPOSITES WITH SUPERIOR MECHANICAL PROPERTIES 

  Vidyasagar, Ch. Suresh (IIT Roorkee, 2019-03)

  Composites are a class of materials developed by reinforcing one or more materials to the matrix. The properties of a composite mainly depend on the factors like reinforcement material and processing method. Though the ...
• MECHANICAL BEHAVIOUR OF DOPED AND UNDOPED ZnO THIN FILMS 

  Bhardwaj, Vipul (IIT Roorkee, 2018-06)

  Fabrication of nanostructured thin films for numerous functional applications has been emerging rapidly in recent times due to their excellent mechanical, optical, and magnetic properties. Nanostructured thin films are ...
• THERMOMECHANICAL SIMULATION KINETICS TO DEVELOP HIGH STRENGTH IF AND MICROALLOYED STEELS 

  Ghosh, Sumit (IIT Roorkee, 2018-02)

  The use of low carbon (C) microalloyed steels has been expanded in many strategic applications such as ship building, line pipe, building construction, bridges, storage tanks, pressure vessels etc. On the other hand, ...
• EFFECT OF TIG SURFACING ON FATIGUE PROPERTIES OF AISI 4340 STRUCTURAL STEEL 

  Kumar, Sudhir (IIT Roorkee, 2018-06)

  Surface modification can be achieved by using advanced high energy heat sources such as plasma, laser, and electron beam. These techniques use high energy concentrated beam on the work piece which generates steep thermal ...
• MECHANICAL BEHAVIOR OF FRICTION STIR PROCESSED Mg ALLOY 

  A, Raja (IIT Roorkee, 2018-07)

  Microstructure having mixture of coarse and fine grained microstructure (bimodal or layered) in Al and few wrought Mg alloys were reported to exhibit superior mechanical properties when compared to the homogeneously fine ...
• ULTRASONIC PROCESSING OF ALUMINIUM ALLOY MELTS 

  Srivastava, Neeraj (IIT Roorkee, 2018-04)

  Grain refinement from solidification processing is an effective and inexpensive method of obtaining improved mechanical properties in light alloys. The combined effect of solute and ultrasound-assisted solidification ...
• EPOXY BASED CNT NANOCOMPOSITES WITH ADVANCED PHYSICAL AND MECHANICAL PROPERTIES 

  Kumar, Arun (IIT Roorkee, 2017)

  This dissertation involves the in-depth investigation of multiwall carbon nanotube (MWCNT)-epoxy nanocomposites containing cluster free uniform dispersion of different types of MWCNTs (MWCNTs, MWCNT/APTES and MWCNT/TiO2) ...

View more