• SOME STUDIES ON THE EFFECT OF HEAT TREATMENT AND DIFFUSIBLE HYDROGEN ON P91 WELDS 

  Pandey, Chandan (IIT Roorkee, 2018-02)

  The weldability P91 steel depends upon suitable heat treatment and welding procedures. With respect to varying heat treatment temperature regimes the nature of precipitation strengthening and mechanical properties of P91 ...
• STUDIES ON ELECTRIC DISCHARGE MACHINING OF METAL MATRIX COMPOSITES 

  Singh, Kamaljit (IIT ROORKEE, 2015-05)

  Metal Matrix Composites (MMC's) are playing a very important role in the industrial growth because of their superior properties such as high toughness, high specific strength, high temperature resistance, high stiffness ...
• MODELING OF VARIABLE COMPLIANT FOUR LEGGED ROBOT 

  Chauhan, Rishit Rajesh (I I T ROORKEE, 2013-06)

  In the era of automation, the interaction of the humans with the robots is unavoidable. Hence, there is a need to improve the safety of humans that interact with the robots for the industrial as well as domestic purposes. ...
• LEAN MANUFACTURING THROUGH VSM FOR ETHIOPIAN LEATHER INDUSTRY 

  Reda, Hiluf (IIT Roorkee, 2022-08)

  Globalization has created numerous problems for industries worldwide. Its influence has grown over the last few decades, affecting manufacturing industries' competitiveness and rendering them highly vulnerable. In such ...
• THERMAL COMFORT USING RANQUE-HILSCH VORTEX TUBE 

  Vivekanand (IIT ROORKEE, 2016-05)

  Thermal comfort is a situation of mind that express satisfaction with ambient condition. It mainly includes following processes: heating. ventilation and cooling. Different parameters that affect the condition of thermal ...
• NATURAL CONVECTION IN MAGNETIC NANOFLUIDS 

  Kumar, Aditya (IIT Roorkee, 2020-12)

  In the forced convection heat transfer, the magnetic nanofluids have been proved efficient, theoretically and experimentally. But, a conflict exists between the theoretical and experimental studies on the natural convection ...
• PERFORMANCE ANALYSIS OF ROTARY TOOL MICRO-USM PROCESS 

  Kumar, Sandeep (IIT ROORKEE, 2019-09)

  Miniaturization of components is the need of hour because it saves raw material, processing time and energy. Therefore, micro components in the form of microfluidic devices are gaining huge importance in the field of ...
• PERFORMANCE AND WEAR CHARACTERISTICS OF A CENTRIFUGAL SLURRY PUMP HANDLING SOLID-LIQUID MIXTURES 

  Tarodiya, Rahul (IIT ROORKEE, 2019-09)

  Centrifugal pumps are being extensively used for hydraulic transportation of solids over short and medium distances through pipelines where the requirements of head and discharge are moderate. The performance and erosive ...
• AN ASSESSMENT OF CLIMATE CHANGE MITIGATION STRATEGIES OF THE INDIAN CEMENT INDUSTRY 

  Balsara, Sachin (IIT ROORKEE, 2019-06)

  Cement is a fundamental requirement of modern society and the concrete, a cement-based product is the highest manufactured and second highest consumed product after water on earth, but across the world, the production ...
• EXPERIMENTAL STUDY ON LOCA SCENARIO IN INDIAN HEAVY WATER NUCLEAR REACTORS 

  Yadav, Subhodh Kumar (IIT ROORKEE, 2019-07)

  The understanding of operating and emergency thermal hydraulic conditions of the Indian nuclear power plant play significant role for safety of power plant. The fleet of nuclear plant consists of 22 commercial operating ...
• SINGLE AND MULTIPLE CHANNEL SAGGING STUDY UNDER SEVERE HEAT-UP CONDITIONS 

  Singh Ankit, Rajkumar (IIT ROORKEE, 2019-11)

  The Loss of Coolant Accident (LOCA) is a critical initiating event that leads to early degradation of fuel cooling and hence challenges the integrity of a channel. The presence of moderator around the affected channel ...
• MOLECULAR DYNAMICS BASED SIMULATIONS TO INVESTIGATE THE EFFECT OF RADIATION DAMAGE ON ZR AND ZR-NB ALLOYS 

  Singh, Divya (IIT ROORKEE, 2019-10)

  Due to lower neutron absorption cross section, favourable thermo-mechanical and creep properties, Zr- Nb alloys are commonly used to manufacture pressure tubes and fuel claddings in nuclear reactors. Alloying with Nb helps ...
• FABRICATION AND ANALYSIS OF AN ARTICIAL HUMAN HIP JOINT FOR SQUAT POSTURE 

  Saxena, Ankit (IIT ROORKEE, 2019-07)

  The bone is highly adaptive to habitual loading, regulating its structure according to components of its loading regime and mechanical environment, inclusive of strain magnitude - strain rate - strain frequency - strain ...
• PERFORMANCE STUDY OF TREPANNING TOOL FOR DEEP ANNULAR GROOVING 

  Vasantrao, Gaikwad Sharad (IIT ROORKEE, 2019-09)

  Drilling is one of the most commonly used machining process in manufacturing industry. In drilling, the entire volume of hole is converted to chips. If the holes produced have diameter larger than 30 mm, a lot of material ...
• SOME STUDIES ON EFFECTS OF HEAT TREATMENT AND HYDROGEN EMBRITTLEMENT IN P92 STEEL WELDS 

  Saini, Nitin (IIT ROORKEE, 2019-11)

  The Creep strength enhanced ferritic (CSEF) steels are developed to meet the demand by power generation organizations to increase efficiency by operating at higher temperature and pressure. The microstructural evolution ...
• DEVELOPMENT OF FLOW AND HEAT TRANSFER MODELS IN HYPERSONIC RAREFIED GAS DYNAMICS 

  Dhurandhar, Shesh Narayan (IIT ROORKEE, 2019-10)

  The Quantum Kinetic model used to predict the shock wave structure and the heat flux at the surface of the vehicle. The dsmcFoam solver is modified to include the Quantum Kinetic chemical reaction model for the hypersonic ...
• PROCESSING TECHNIQUES AND DEGRADATION BEHAVIOR OF SUSTAINABLE POLYMERIC COMPOSITES 

  Komal, Ujendra Kumar (IIT ROORKEE, 2019-10)

  Development of sustainable materials is an area where efforts are being put worldwide for ensuring judicious as well as optimal utilization of available resources. Composite materials signify a class of materials with ...
• MECHANICAL PROPERTIES AND CORROSION RESISTANCE OF FSW JOINT OF ALUMINIUM ALLOYS 

  Sinhmar, Sunil (IIT ROORKEE, 2019-11)

  is the second most used material for various industrial applications after the steel (Vargel et al., 2004). It is the most plentiful metal in the crust of earth (Handbook Metals, 1990). Duralumin was the first Al-Cu-Mg ...
• PERFORMANCE STUDY AND LIFE PREDICATION MODEL FOR COATING ON HEAT RESISTANT STEELS 

  Thakare, Jayant G (IIT ROORKEE, 2019-10)

  To protect the structural components of a power generating unit from the corrosive environment, thermal spraycoatings are applied to the components. In the present work, four different types of thermal barrier coating ...
• DEVELOPMENT OF ZIRCONIA TOUGHENED ALUMINA CEREMIC NANO COMPOSITES WITH ADDITION OF AND CNTs 

  Meena, Kunjee Lal (IIT ROORKEE, 2019-06)

  Composites are a class of materials developed by reinforcing one or more materials to the matrix. The properties of a composite mainly depend on the factors like reinforcement material and processing method. The main ...

View more