Recently added

CONVECTIVE FLOW AND HEAT TRANSFER ANALYSIS BY USING THERMAL LATTICE BOLTZMANN METHOD

Madhukar, Gangawane Krunal (Dept. of Chemical Engineering iit Roorkee, 2014-12)

Over the years, great extent of research efforts are devoted towards the investigation of hydrodynamic characteristics of thermally driven flows and transport processes, due to their fundamental and pragmatic significance. ...

ELECTROCHEMICAL TREATMENT OF DYE BEARING WASTEWATER

Singh, Seema (Dept. of Chemical Engineering iit Roorkee, 2014-05)

Textile industries, although provide clothes which are one of the basic needs of human beings, however, they are one of the largest exploiters of water and other complex chemicals during various stages of processing such ...

TREATMENT OF PETROLEUM REFINERY WASTEWATER

Thakur, Chandrakant (Dept. of Chemical Engineering iit Roorkee, 2013-12)

Petroleum industries transform crude oil into useful products such as kerosene, gasoline, and other petrochemical feedstocks. This process consumes large amount of water, consequently significant amount of wastewater ...

BIODIESEL PRODUCTION USING CONTINUOUS ULTRASONICATION OF NON-EDIBLE OILS

Chakradhar, Pokala (CHEMICAL ENGINEERING IIT ROORKEE, 2016-05)

The present work focuses on biodiesel production from non-edible oils using continuous ultrasonication. The use of non-edible oils as a feedstock improves the economy of biodiesel production. Further, the process intensification ...

MOLECULAR SIMULATION METHODS FOR pH RESPONSIVE MOLECULES

Rajput, Pramanshu (CHEMICAL ENGINEERING IIT ROORKEE, 2016-05)

pH is an important parameter in many chemical systems, as it determines the protonation state of an ionisable site in a molecule and thus affects the structure, dynamics and function of the molecule in a solution. Although ...

DIRECT CHEMICAL LOOPING FOR HYDROGEN PRODUCTION USING COAL WITH IRON OXIDES – BASED OXYGEN CARRIER

Gurjar, Rahul (CHEMICAL ENGINEERING IIT ROORKEE, 2016-05)

The present work entitled as “Direct Chemical Looping for Hydrogen production using coal with iron oxide-based oxygen carrier” is related to the modeling of the Coal direct chemical looping (CDCL) and Syngas chemical looping ...

EFFECT OF HEAT AND CHEMICAL TREATMENT ON MECHANICAL, THERMAL AND WATER ABSORPTION BEHAVIOR OF JUTE FIBER REINFORCED HIGH DENSITY POLYETHYLENE COMPOSITES

Saini, Rajat (CHEMICAL ENGINEERING IIT ROORKEE, 2016-05)

Jute fiber/High density polyethylene (HDPE) composites were prepared as sandwiches of woven Jute mats and HDPE sheets. Composites fabricated using two Jute mats yielded best results: Tensile strength, Flexural Strength, ...

EXERGY ANALYSIS OF WASTE TO ENERGY CONVERSION OF MUNICIPAL SOLID WASTE

Mohan, Jarpula (DEPARTMENT OF CHEMICAL ENGINEERING IITR, 2016-05)

Municipal solid waste (MSW) has been a menace due to rapid urbanization and uncontrolled population in India. MSW identified as the energy source and this energy is recovered through waste to energy conversion processes. ...

THERMODYNAMIC ANALYSIS OF CARBON DIOXIDE CONVERSION TO METHANOL

Kumar, Manish (DEPARTMENT OF CHEMICAL ENGINEERING IITR, 2016-05)

Carbon dioxide (CO2), a greenhouse gas, is considered to be largely responsible for global warming. Over the last two decades, mitigation of CO2 emission has become an important area of research. One of the promising methods ...

PULSATILE FLOW AROUND HEATED SEMI-CIRCULAR CYLINDER

Bhalla, Neelesh (DEPARTMENT OF CHEMICAL ENGINEERING IITR, 2016-05)

A numerical analysis was carried out to examine the effect of pulsating flows around a semi-circular heated cylinder placed in a horizontal confined empty channel. The heat transfer induced as an outcome of non-zero mean ...

SELECTIVE ALKYLATION OF BENZENE WITH ETHANOL USING MODIFIED HZSM-5 TO PRODUCE ETHYLBENZENE

Emana, Abdi Nemera (2016)

Alkylation of benzene to produce ethylbenzene is a considerable importance due to the increasing demand of ethylbenzene and diethylbenzene in chemical industries. The demand of ethylbenzene is found to be higher due to its ...

COPROCESSING OF PYROLYSIS OIL WITH VGO IN FCC UNIT TO PRODUCE LPG AND GASOLINE

Naik, Desavath Viswanatha (2015)

Lignocellulosic biomass-derived fast pyrolysis oil (FPO) has found applications within the petroleum refinery in recent years. This thesis investigates the possibility of upgrading FPO along with petroleum-derived fraction, ...

ELECTROCHEMICAL TREATMENT OF SYNTHETIC PURIFIED TEREPHTHALIC ACID WASTEWATER

Garg, Krishan Kishor (2015)

Large amount of wastewater is generated during production process of terephthalic acid (TPA) in purified terephthalic acid (PTA) plant. It is estimated that about 3-10 m3 of wastewater is generated during production of ...

REMOVAL OF CHROMIUM AND PHENOL FROM SINGLE AND BINARY SIMULATED SYNTHETIC TANNERY WASTE WATER

Gupta, Ankur (2016)

With the increase in industrialization worldwide, industries such as electroplating, leather tanning, textile, paints and pigments discharge toxic effluent, which contains Cr(VI) and organic matter like phenol (Gupta et ...

FLOW OF EMULSIONS THROUGH POROUS MEDIA

Kundu, Partha (2016)

Fluid transport in porous media has been an area of intense research due to its importance in a number of chemical and allied industries. Modeling flow through porous media at the engineering scale usually employs semi ...

REMOVAL OF NITROGENOUS HETEROCYCLIC COMPOUNDS FROM AQUEOUS SOLUTION

Devidas, Hiwarkar Ajay (2015)

Nitrogenous heterocyclic compounds are one of the most important classes of chemicals. Nitrogenous compounds containing wastewater are generated in industries like petroleum, pharmaceutical, textile, chemicals, etc. Nitrogen ...

SYNTHESIS AND CHARACTERIZATION OF CATALYSTS FOR DIMETHYL CARBONATE PRODUCTION

Kumar, Praveen (2015)

The need for eco-friendly fuels for transport vehicles has spurred the search for new molecules and their viable and cost-effective synthesis method. Several research groups are working on the production techniques of ...

PERFORMANCE CHARACTERISTICS OF WARM MIX ASPHALT

Behl, Ambika (2016)

India is a vast country, having widely varying climate and traffic in terms of both load and volume.. In general, roads in India are mainly bitumen-based roads. During construction of the bituminous pavement, the temperature ...

INFLUENCE OF SURFACTANTS ON THE FORMATION AND DISSOCIATION OF GAS HYDRATES IN FIXED BED MEDIA

Arora, Amit (2016)

Rapid growth in energy demand with depleting energy resources, along with anthropological discharge of CO2 in environment has lead to search for unconventional energy resources like Natural Gas Hydrates (NGH), of which ...

PREPARATION AND CHARACTERIZATION OF BAGASSE-WHEAT STRAW FIBER/ EPOXY BLENDED COMPOSITES

Mittal, Varun (2016)

Research in lignocelluloses materials is important because of their advantages over conventional reinforcing materials, namely, low density, high specific properties, non-abrasive nature, high level of filler loadings, ...

Recently added

CHEMICAL ENGINEERING: Recent submissions

Search DSpace

Browse

All of DSpace

This Community

My Account