DSpace Home
→
POLYMER AND PROCESS ENGINEERING
→
MASTERS' THESES (Polymer and Process engg.)
→
Browsing MASTERS' THESES (Polymer and Process engg.) by Issue Date

Browsing MASTERS' THESES (Polymer and Process engg.) by Issue Date

Now showing items 1-13 of 13

STUDY OF SINGLE AND TWO PHASE FLOW OF WATER WITH POLYMER ADDITIVES

Bhanibri, Pallavi (I I T ROORKEE, 2014-05)

Frictional losses and near wall turbulence can be reduced in pipelines by addition of small amount of' high molecular weighi. polymer to water. In the present study experiments were conducted in a rectangular mixing ...
SURFACE ADHESIVES FOR REMOVAL OF KIDNEY STONE FRAGMENTS

Tammareddy, Harshini (I I T ROORKEE, 2014-05)

Current technologies implemented for removing kidney stones are complex and doesnot achieve 100% removal of kidney stones. The objective of this project is to prepare formulations of bio adhesives for removing kidney ...
STUDY OF INHIBITOR BINDING TO BIOLOGICAL MACROMOLECULES USING ATOMISTIC MODELING AND SIMULATION

Ravikiran, Muley Abhijit (I I T ROORKEE, 2014-06)

Mammalian target of rapamycin (mTOR) is a large (-250 kDa) naturally occurring biological molecule that plays a critical role in controlling cell growth. Using adenosine triphosphate (ATP) as a substrate, mTOR tags target ...
MODELING AND SIMULATION OF POLYPROPYLENE PRODUCTION USING ASPEN AND OPTIMIZATION

Reddy N., Pratap (I I T ROORKEE, 2014-06)

With the increasing demand of polymer products, there are abundant opportunities for upstream petrochemical industries to enhance their present capacity and deliver optimum quality products to the downstream industries ...
STRUCTURE AND PROPERTIES OF MOLECULAR COMPOSITE OF POLY-p-PHENYLENE-TEREPHTHALAMIDE / POLYAMIDE-6, 6 IPPTA/PA-6, 6j

Nagar, Kuldeep (I I T ROORKEE, 2014-06)

The molecular composite is a miscible blend where the rigid-rod polymer is dispersed at the molecular level in a matrix of flexible-coil polymer. This project investigates the processing, structure and properties of ...
DEVELOPMENT OF MICROARRAYS BASED ON PATTERNED POLYMER SURFACES FOR MiNIATURIZED AND MULTiPLEXED DIAGNOSTIC APPLICATIONS

Gudadhe, Aniket Avinash (I I T ROORKEE, 2014-06)

Microfluidic droplet arrays are an emerging class of lab-on-chip systems which are being explored for multitudes of applications such as high throughput screening of cells, chemical synthesis, colorimetric detection of ...
MOLECULAR SIMULATIONS OF INDUSTRIALLY RELEVANT POLYVINYL ACETATE (PVA) BASED COATINGS

Singhvi, Yash (I I T ROORKEE, 2014-06)

Polyvinyl acetate (PVA) based coatings find extensive applications in various coating and paint industries globally. Grafting and copolymeriZatiofl of PVA with oleophobic moieties/monomers has resulted in potential coating ...
GOLD NANOPARTICLE UPTAKE IN POLYMERSOMES FOR BIO-MEDICAL APPLICATIONS

Pattanaik, Shruti (I I T ROORKEE, 2014-06)

This thesis focusses on the investigating a suitable route to enable uptake of large sized (30 nm and 60 nm) gold nanoparticles by pH responsive polymersornes of diameters ranging from 110-140 nm. Addition of these gold ...
STRUCTURE AND PROPERTIES OF MOLECULAR COMPOSITE OF POLY-p-PHENYLENE-TEREPHTHALAMIDE / POLYAMIDE-6, 6 IPPTA/PA-6, 6}

Nagar, Kuldeep (I I T ROORKEE, 2014-06)

The molecular composite is a miscible blend where the rigid-rod polymer is dispersed at the molecular level in a matrix of flexible-coil polymer. This project investigates the processing, structure and properties of ...
STENGTH ANALYSIS OF 3D PRINTED POLYMER MATERIALS

Shankhar, S. Gowri (I I T ROORKEE, 2014-06)

3D Printing or Rapid Prototyping has been next big thing in manufacturing industry so far. But materials that are 3D printed are observed to have less strength. Systematic study on the strength of printed materials is ...
STRUCTURE AND PROPERTIES OF MOLECULAR COMPOSITES OF POLYP-PHENYLENE-TEREPHTHALAMIDEI POLY-ETHER-ETHER-KETONE IPPTA!PEEKI

Shekhar, Himanshu (I I T ROORKEE, 2014-06)

Molecular composites have been classified as the third generation of Polymers. The concept of Molecular Composite was .first presented by Dr. T.E.Helminiak of USAF-WPAFB. Molecular composite is defined as a miscible blend ...
SIMULATION OF LIION BATTERY AND ITS OPTIMIZATION USING SIMULATED ANNEALING ALGORITHM

Kumar, Kunal (I I T ROORKEE, 2014-09)

This report is a comprehensive collection of the design, simulation and optimization of lithium ion battery systems. The battery is simulated using code Dualfoil which is taken from Doyle's thesis. It includes theoretical ...
SYNTHESIS OF POLYMER NANO PARTICLES FOR STRUCTURAL COLOR APPLICATIONS

Asritha, Nallapaneni (I I T ROORKEE, 2014-09)

Colors are the evolution's most beautiful accident. The color of the paint in general is attributed to the pigments present in it. Pigments exhibit color by absorbing defined portion of the wavelength of light, leaving the ...

Now showing items 1-13 of 13

Search DSpace

Advanced Search

Browse

All of DSpace
This Collection

Browsing MASTERS' THESES (Polymer and Process engg.) by Issue Date

Browsing MASTERS' THESES (Polymer and Process engg.) by Issue Date

Search DSpace

Browse

All of DSpace

This Collection

My Account