dc.description.abstract |
Hydroxamic acids and acid hydrazides are important chemical compounds with
considerable applications in pharmaceutical, medicinal, polymer and agrochemical
industries. Nicotinic acid hydroxamate, a heterocyclic class of hydroxamic acid has roles
as bioligand, urease inhibitor, antityrosinase, antioxidant, antimetastatic and vasodilating
agents due to strong metal chelating ability and possibly their NO releasing property.
Isoniazid and its derivatives are potent antituberculosis agents and isoniazid has been
employed in the treatment of tuberculosis for over half a century. Chemical methods for
syntheses of hydroxamic acids and acid hydrazides present several disadvantages and thus
there is a need to explore efficient enzymatic routes for syntheses of these compounds.
Amidases have been studied as biocatalyst for syntheses of hydroxamic acids and acid
hydrazides, however amidase catalysed bioprocesses for productions of nicotinic acid
hydroxamate and isoniazid are still not developed. The major objective of the present
thesis was to develop biocatalytic processes for syntheses of nicotinic acid hydroxamate
and isoniazid using acyltransferase activity of whole cell amidase.
At the beginning of this thesis, Chapter 1 introduces briefly about roles of
hydroxamic acids and acid hydrazides in various industrial applications with special
emphasis on nicotinic acid hydroxamate and isoniazid. The present scenario of different
existing chemical and enzymatic methods for syntheses of these compounds was discussed.
Further, it also dealt with the limitations and disadvantages associated with the chemical
methods and suitability of amidase catalyzed biocatalytic methods to overcome these
drawbacks was highlighted. Finally the objectives to be attained in this study were
specified in brief.
Followed by this, Chapter 2 presents (1) the detail review on hydroxamic acids
and acid hydrazides, their structures, functions and industrial applications of nicotinic acid
hydroxamate and isoniazid; (2) a detailed description of various chemical methods of
syntheses of these compounds; (3) information on enzymatic routes for syntheses of
hydroxamic acids and acid hydrazides reported in various literatures, factors affecting
enzyme catalyzed processes, advantages of enzymatic methods over chemical methods; (4)
ii
and finally classification, mechanism of action, occurrence and properties of reported
amidases with their industrial applications in various fields.
Further, Chapter 3 deals with materials and methods used in present work.
Detailed descriptions of methods, different experimental techniques utilized in this study
were mentioned.
Detailed results, obtained during this work along with discussion are presented in
Chapter 4. This chapter is divided into four sections. The work presented in Section 1
aimed at screening of suitable bacterial isolate producing amidase enzyme having
acyltransferase activity. Among ten available nitrile metabolizing bacterial isolates, 6b2
was selected as biocatalyst as it possessed acyltransferase activity for a broad range of
amides, higher acyltransferase to amide hydrolase activity ratio for heterocyclic amides
and the highest mole ratio of product (nicotinic acid hydroxamate) to by-product (nicotinic
acid). Isolate 6b2 was identified as Bacillus smithii strain IITR6b2, based on biochemical
characteristics and 16S rDNA sequence. The influences of various physiochemical
parameters on amidase production were studied using one variable at a time approach.
Amidase was found to be inducible in nature. Under optimized conditions, maximum
amidase production was obtained in mid exponential growth phase at 48 h with glycerol
(10 g/l) as carbon source, phenylacetonitrile (10 mM) as sole source of nitrogen and
inducer at pH 7.0 and temperature 45 °C. Whole cell amidase had pH and temperature
optima of 7.0 and 55 °C respectively. Acyltransferase activity of amidase was thermally
stable with half lives of 29, 14 and 10 h at 30, 45 and 55 °C respectively. Amidase showed
acyltransferase activity for a broad range of amides like aliphatic, aromatic and
heterocyclic amides with highest activity for nicotinamide. Whole cell amidase was
compatible in presence of both water miscible and water immiscible solvents at 15% (v/v)
concentration. This solvent compatible property is highly desirable for syntheses of
hydroxamic acids and acid hydrazides from hydrophobic amides that are poorly soluble in
aqueous medium.
Although amidases from different microbial sources having acyltransferase activity
for a broad range of amides have been studied, only a few have been reported to develop
bioprocesses for syntheses of hydroxamic acids. Bioprocess development for synthesis of
nicotinic acid hydroxamate using acyltransferase activity of B. smithii strain IITR6b2 is
described in Section 2. Amidase with acyltransferase activity for nicotinamide is suitable
iii
for nicotinic acid hydroxamate production. However amidase can also simultaneously
hydrolyzes nicotinamide to nicotinic acid. Nicotinic acid is an undesirable by-product and
thus any biocatalytic process involving amidase for nicotinic acid hydroxamate production
needs to have high ratio of acyltransferase to amide hydrolase activity. Isolate B. smithii
strain IITR6b2 was found to have 28 fold higher acyltransferase to amide hydrolase
activity. This higher ratio resulted in limited undesirable by-product, nicotinic acid
synthesis. Further the effects of various parameters on bioconversion yield were
investigated in detail. The optimal substrate/co-substrate ratio, pH, temperature, incubation
time and resting cells concentration were 200/250 mM, 7.0, 30 °C, 40 min and 0.7
mgdcw/ml respectively. Under these optimized reaction conditions, 94.5% molar conversion
of nicotinamide to nicotinic acid hydroxamate was achieved. To avoid substrate inhibition
effect, a fed batch process based on the optimized parameters was developed and a molar
conversion yield of 89.4% with the productivity of 52.9 g/h/gdcw was achieved in
laboratory scale. Finally, 6.4 g of powder containing 58.5% (w/w) nicotinic acid
hydroxamate was recovered after lyophilisation and further purification resulted in 95%
pure product.
In Section 3, a biocatalytic route for the synthesis of isoniazid, in aqueous system is
presented. Acyltransferase activity of B. smithii strain IITR6b2 was utilized for its ability
to transfer acyl group of isonicotinamide to hydrazine-2HCl in aqueous medium. Whole
cell amidase possessed 3 folds higher acyltransferase activity as compared to amide
hydrolase activity for isonicotinamide and this ratio was further improved to 4.5 by
optimizing concentration of co-substrate hydrazine–2HCl. Various key parameters were
optimized and under the optimum reaction conditions of pH (7.0, phosphate buffer 100
mM), temperature (30 °C), substrate/co-substrate concentration (100/1000 mM) and
resting cells concentration (2.0 mgdcw/ml), 90.4% conversion of isonicotinamide to
isoniazid was achieved in 60 min. Under these conditions, a fed batch process for
production of isoniazid was developed and resulted in the accumulation of 439 mM of
isoniazid from 500 mM isonicotinamide with 87.8% molar conversion yield and
productivity of 6.0 g/h/gdcw. Finally, 9.1 g of powder containing 33.3% (w/w) isoniazid
was recovered after lyophilisation and further purification resulted in 94% pure product.
In addition, amidase from B. smithii strain IITR6b2 was purified and characterized
as reported in Section 4. Purified amidase was characterized for temperature optima, pH
optima, substrate specificity, organic solvent compatibility, effects of chemical reagents
iv
including metals, inhibitors and surfactants and was compared with amidases reported in
literature from other microbial sources. Intracellular amidase was purified to 12.11 fold
with yield of 37.5% by a procedure involving ammonium sulphate precipitation (30-60%),
ultrafiltration by amicon (10 kD), column chromatographies with Q sepharose and phenyl
sepharose resins. The purified amidase was a monomer with molecular mass of 63 kDa as
determined by gel filtration chromatography and SDS-PAGE. Purified amidase had pH and
temperature optima of 7.0 and 45 °C respectively. The substrate specificity of purified
amidase was determined for both acyltransferase and amide hydrolase activities. It had
highest acyltransferase activity with nicotinamide followed by benzamide and hexanamide.
This amidase also hydrolyzed different amides but acyltransferase activity was
considerably higher as compared to amide hydrolase activity. Purified amidase was not a
metalloenzyme as metal chelating reagent EDTA did not affect the enzyme activity. The
amidase activity was highly inhibited by heavy metal ions and –SH modifying reagents
(DTNB and NEM), while reducing agent DTT improved enzyme activity to 2.2 fold
suggesting thiol group involvement at amidase active site. Purified amidase was
compatible with organic solvents and maintained more than its 90% activity in 10% (v/v)
of methanol, ethanol, isopropanol, acetonitrile, 1-Decanol, DMF, Xylene, hexane, heptane
and n-hexadecane. In presence of methanol, ethanol and isopropanol at 20% (v/v)
concentration activity reduced to 76, 56 and 53% respectively. Amidase activity was
enhanced to 285, 302, 365 and 157% in the presence 0.05% (v/v) of non ionic surfactants
such as Tween 20, Tween 60, Tween 80 and Triton X-100 respectively. On the other hand
SDS and CTAB caused complete inhibition of activity. The substrate specificity profiles of
purified amidase and whole cell amidase were found considerably different and it led to
predict the presence of one more amidase having affinity for short chain aliphatic amides.
This second amidase was partially purified. The two amidases purified from B. smithii
strain IITR6b2 totally differed in substrate specificity and temperature optima, while pH
optima were nearly same.
Finally, in Chapter 5, summary of the complete work and the conclusions drawn
are presented. In conclusion, the present work demonstrates the development of efficient
bioprocesses for nicotinic acid hydroxamate and isoniazid syntheses using acyltransferase
activity of B. smithii strain IITR6b2. These results also presents that this bacterial isolate
can be a potential biocatalyst for syntheses of other hydroxamic acids and acid hydrazides. |
en_US |