Recently added

DEVELOPMENT OF IRON-PHOSPHORUS BASED TERNARY ALLOYS BY P/M ROUTE FOR A.C. APPLICATIONS

Pandey, Rajanish Kumar (2011)

High density Fe-P-Si and Fe-P-Sn ternary alloys were made using hot forging technique. In this process, mechanically alloyed powders were directly forged in a die cavity at room temperature. These forged samples were coated ...

INFLUENCE OF SURFACE MODIFICATION ON COMPRESSIVE PROPERTIES OF CLOSED CELL ALUMINUM FOAM

Prabhakaran, S. (2011)

Aluminum foams have been increasingly used in automotive and aerospace applications due to their high strength-to-weight ratio, good impact resistance and excellent energy dissipation capacity. Foamed aluminum does not ...

THERMOMECHANICAL PROCESSING OF DUAL PHASE STEEL AND ITS CORROSION BEHAVIOUR

Singh, Abhishek Kumar (2011)

In present study an attempt has been made to introduce a potential processing route and most suitable processing conditions for the development of ultrafine grained dual phase steels by using thermomechanical processing. ...

FAILURE I1NVESTIGATION. OF SURFACE DEFECTS ING IN HOT-ROLLED IS- 2831 GRADE. BILLETS

Karthik, P. Sai (2011)

Steel Pipe manufacturing units generally face problems with the surface quality of the rolled coil, which is welded through Electrical Resistance Welding (ERW) process to produce seamed pipes. The rolled coil is produced ...

SPRAY FORMING AND CHARACTERIZATION OF COLD ROLLED AI-Pb ALLOY

Bandi, Venkata Ramana Reddy. (2011)

Processing of Al-Pb alloys by the conventional casting techniques is difficult due to liquid immiscibility and segregation of lead during melt solidification. To overcome these problems, spray forming can be used which ...

CORROSION STUDIES ON ULTRAFINE GRAINED Al ALLOYS FOR AEROSPACE APPLICATIONS

M, Gopi (2011)

The development of high strength Aluminium alloys for aerospace and automobile applications is ever growing due to the importance of realizing extended life period of the structural components fabricated from these alloys. ...

DEVELOPMENT OF DUAL PHASE STEEL BY THERMO-MECHANICAL PROCESSING

Suryavashi, Gaurav (2011)

In this work, dual phase steel were developed from plain low carbon (0.16%) steel by adapting thermo mechanical treatment route. Nine different types of thermo mechanical treatments were given to plain low carbon steel on ...

COATING OF HYDROXYAPATITE SYNTHESIZED BY SOL-GEL ROUTE ON SS-304L BY` AND STUDY OF. ITS IN SBF

Agarwal, Khelendra (2011)

Hydroxyapatite (HA) has become the first choice for coating of bioimplant in past decade due to its chemical and structural similarity with the mineral phase of bone and teeth. It is used as a coating material for various ...

CHARACTERIZATION OF SPRAY FORMED ALUMINUM ALLOYS

Zagabathuni, Aparna (2011)

Processing of Aluminum alloys (Al- Graphite and Al-Si-Pb) by the conventional casting techniques is difficult due to liquid immiscibility and segregation of second phase particles during melt solidification. To overcome ...

MULTIPASS FRICTION STIR PROCESSING OF Al 5086 ALLOY AND ITS CHARACTERIZATION

Ramesh, K. N. (2011)

There is an increasing scientific and industrial interest in the development of bulk fine-grained alloys intended for wide variety of applications. The average grain size of the . material generally plays a very significant ...

EFFECT OF HEAT TREATMENT ON SLURRY EROSION BEHAVIOUR OF 21-4-N NITRONIC STAINLESS STEEL

Kumar, Sunil (2011)

Energy is one of the key factors that influence the development of a nation providing economic and social benefits to its people. This is more important in developing countries like India, for economic development at micro ...

SYNTHESIS OF HYDROXYAPATITE POWDER FROM EGG SHELL AND ITS COATING BY PLD PROCESS ON SS 316L VARYING LASER ENERGY

Khandelwal, Himanshu (2011)

Hydroxyapatite (HA) is a attractive biomaterial mainly used in bone and tooth implants because it closely resembles human tooth and bone mineral and has proven to be biologically compatible with these tissues. Nanocrystalline ...

EFFECT OF ULTRASOUND ON THE STRUCTURE AND MECHANICAL PROPERTIES OF AS41 MAGNESIUM ALLOY

Hirabhai, Patel Bantibhai (2011)

Recently Mg-based alloys have drawn increasing attention of designers and scientists owing to their low density, high strength-to-weight ratio, high damping capacity, excellent machinability, good castability and low ...

CHARACTERIZATION OF WELDABIL.ITY - OF SCANDIUM INOCULATED Al'Zn-Mg ALLOY

Muke, Amit (2011)

The high strength aluminum alloys hold significant share in the worldwide usage of light alloys. The Al-Zn-Mg alloys in particular which come under the 7xxx series of aluminum alloys have special high strength characteristics. ...

DEVELOPMENT OF PRECIPITATION HARDENED. 7075-AI/Cr7C3 COMPOSITES

Varshney, Abhinav (2011)

7xxx Aluminium alloys have been the centre of attraction for many researchers due to their excellent properties in the available aluminium alloys. Although, wrought and cast product of this particular alloy is satisfying ...

ODS STEELS BY POWDER FORGING

Zinzuwadia, Mayur (2011)

The development of radiation resistant steels for fusion reactors would rely heavily on the rich experience gained in the commercialization of fast reactor core component materials, in the last three decades. The structural ...

INVESTIGATION OF TRIPS EFFECT IN 1.4301(18.10) AUSTENITIC STAINLESS STEEL

Gupta, Satyapriya (2011)

Metastable austenitic stainless steels undergo strain-induced martensitic transformation, where the metastable austenite phase is transformed to the thermodynamically more stable a'-martensite phase due to plastic deformation. ...

THERMOMECHANICAL PROCESSING OF 13/4 MARTENSITIC STAINLESS STEEL AND ITS SLURRY EROSION BEHAVIOUR

Srivastava, Manas (2011)

13/4 martensitic stainless steel is standard material for hydro turbine blade. A lot of effort is being put to improve wear resistance of this steel further. In view of this, in the present work an effect has been made to ...

STUDIES ON CHARACTERISTICS OF INORGANIC NANO PARTICLES FILLED EPDXY ADHENSIVE PRODUCED BY EX-SITU AND IN-SITU REINFORCEMENT TECHNIQUES

Gautam, Telgote Ashish (2010)

The Zr02 nano particles were synthesized in the epoxy resin by the in-situ and ex-situ growth technique for a PMC with ceramic nano particles bonded with the matrix molecules. In in-situ the presence of the bond formation ...

CORROSION BEHAVIOR OF CRYOROLLED ULTRAFINE GRAINED 7075 ALUMINIUM ALLOY

Gaur, Deepak (2010)

Aqueous corrosion study by salt immersion test and electrochemical test in 3.5% Nacl solution of cryo rolled 7075 Al alloy subjected to peak ageing treatment are reported in the present investigation. The results are ...

Recently added

MASTERS' THESES (MMD): Recent submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account