DSpace Repository

Browsing MASTERS' THESES (MIED) by Title

Browsing MASTERS' THESES (MIED) by Title

Sort by: Order: Results:

  • 2-DIMENSIONAL DRAFTING SOFT-WARES FOR MECHANICAL DRAWING 
    Pashmforoosh, Ali Reza (1986)
    The drawing is the most important product of the design process in Mechanical Engineering. Drawing documentation constitutes a link between the design office and the manufacture. Traditional industrial drafters spend lot ...
  • 3-D SIMULATION OF INTERPENETRATING PHASE COMPOSITES USING FEM/EFGM 
    Kumar, Pramod (I I T ROORKEE, 2013-06)
    Interpenetrating Phase Composites (IPCs) are multiphase composites where each phases is interconnected three- dimensionally. The lighter, stilThr stronger and tougher material is called metal phase and the other as ...
  • THE 5S's CAMPAIGN FOR TOTAL QUALITY ENVIRONMENT-A CASE STUDY 
    Garvalia, N. N. (2001)
    Today quality is seen as an approach to improve the effectiveness and flexibility of an organization as a whole. Teamwork,, participation and communication are key words in the process quality. Today neck to neck ...
  • A'STUDY ON THE PERFORMANCE OF HOLE-ENTRY HYBRID JOURNAL BEARINGS OPERATING IN TURBULENT REGIME 
    Sankla, Devendra (2011)
    Bearings are used extensively in all rotating machinery in the industry to support load. Their performance plays an important role in chemical, petrochemical, automotive, power generation, aerospace, turbo machinery and ...
  • ACTIVE NOISE CONTROL OF SOUND PROPAGATION IN THE DUCT 
    Prakash, Pagadalaravi (2006)
    This report presents general background information about ANC methods. Contrasts between passive and active noise control are described and circumstances under which ANC is preferable are given. An ideal filtering problem ...
  • ACTIVE VIBRATION CONTROL OF A SMART PLATE 
    Patil, Anant S. (2005)
    Active vibration control and using piezoelectric sensors and actuators have recently emerged as a practical and promising technology. Efficient and accurate modeling of these structures bonded to or embedded with actuators ...
  • ACTIVE VIBRATION CONTROL OF PIEZO-LAMINATED CIRCULAR PLATE 
    Arif, Mohammad (2009)
    This work deals with the experimental study of vibration suppression of circular annular plate clamped at the inner boundary and free at the outer boundary using pie2oelectric patches. Piezoelectric material is used, both ...
  • ACTIVE VIBRATION CONTROL OF PLATE WITH INTEGRATED SENSORS AND ACTUATORS 
    Rama, Hipparkar Dattatraya (2006)
    Active vibration control using piezoelectric sensors and actuators have recently emerged as a practical and promising technology. Efficient and accurate modeling of these structures bonded to or embedded with actuators and ...
  • ACTIVE VIBRATION CONTROL OF SHELL 
    Sharma, Anurag (2009)
    Recent advances in materials science have led to the development of a range of functional materials which when embedded into a structure can produce and monitor structural deformations. These structures have been labeled ...
  • ACTIVE VIBRATION CONTROL OF SMART CURVED BEAM 
    S., Udagiri Santosh (2006)
    In recent years, the strong demand for higher performance structures has driven a new development of smart materials and structures. Piezolaminated smart structures composed of passive elastic materials and active piezoelectric ...
  • ACTIVE VIBRATION CONTROL OF STRUCTURE USING PIEZOELECTRIC PATCHES 
    Yeola, Mahes Prabhakar (2004)
    The work presented here deals with Active Vibration Control (AVC) of a Cantilever Beam with Piezoelectric Patches using Finite Element Method (FEM). One patch is used as a sensor, sending the signal in terms of voltage to ...
  • ACTIVE VIBRATION •CONTROL OF SMART BEAM AND CIRCULAR PLATE 
    Khatri, Chandra Bahadur (2011)
    Recent advances in materials science have led to the development of a range of functional materials which when embedded into a structure can produce and monitor structural deformations. These structures have been labeled ...
  • ADOPTABILITY OF ISO - 9002 TO ARMY REPAIR WORKSHOPS 
    Sehgal, Arun (2002)
    Customer satisfaction, profitability and market leadership are driven in large parts by delivering quality products and services to customers. For an organization to survive and flourish in the present day competitive ...
  • AIR CONDITIONING IN TRANSPORTATION 
    Thakur, S. D. (1962)
    With the advancement of Scientific and technical knowledge the field of air-conditioning is not only confined to stationary objets but is covering various other aspects also such as in transportion field. This dissertation ...
  • AIR FLOW VISUALIZATION IN THE CYLINDER OF TWO STROKE ENGINE 
    Kumar, Dinesh (1989)
    The performance of small two stroke,. crankcase scavenged, spark ignition engine depends very largly on the effectiveness of scavenging the cylinder and on the amount of fresh charge retained during the scavenging process. ...
  • ANALYSIS AND COMPARISON OF PERFORMANCE OF A SWINGING VANE WIND ROTOR 
    Reddy, D. Rajini Kanth (2001)
    Analysis of a vertical axis wind rotor using two and three flat swinging vanes has been carried out in this work. Conventional horizontal axis small wind turbines are prohibitively costly and mostly based on imported ...
  • ANALYSIS AND DESIGN OF KING POST USING STATISTICAL APPROACH 
    Mathur, Anil Chand (1988)
    The steerable antennas having paraboloidal reflectors are used for Satellite Communications (SATCOM) purposes. For proper functioning of these antennas which are important part of a SATCOM system, their design need to be ...
  • ANALYSIS AND DESIGN OF PIPE NETWORKS 
    Rajiv J., Naik (1987)
    Pipe networks are used to transport liquids and gases from the sources to various locations of their utility. Analysis and design of pipenetworks, in general, involves the solution of a set of nonlinear simulataneous ...
  • ANALYSIS AND MEASUREMENT OF CUTTING FORCES IN RELATION WITH TOOL WEAR 
    Neema, M. L. (1969)
  • ANALYSIS AND OPTIMIZATION OF SYSTEMS AVAILABILITY IN SUGAR, PAPER AND FERTILIZER INDUSTRIES 
    Kumar, Dinesh (1991)
    The sugar, fertilizer, paper mills etc. are complex, repairable engineering systems comprising of a large number of subsystems interconnected in series/ parallel or both. For efficient working, it is essential that the ...