MASTERS' THESES (Electrical Engg): Recent submissions

  • SYNCHONI SED ASYNCHONOUS MACHINES 
    Unknown author (1961)
    The a mthronised A ynchrono ue machine is r.d entally a slipring asynchronous motor, lb gLve it a high starttng torque, same r istce is introduced in the a for circuits which is cut in stepa, Wham fall asynchronous motor ...
  • SOME ASPECTS OF A RELUCTALCE MOTORS 
    Duggal, H. L. (1960)
  • DESIGN AND IMPLEMENTATION OF DC-DC BI-DIRECTIONAL BUCK AND BOOST CONVERTER 
    Pala, Sumanth (2012)
    Switch Mode Power Supplies (SIPS) are very important components in present day electronics and have continued to thrive and grow over the past 25 years. Electronic switch-mode DC to DC converters convert one DC voltage ...
  • EFFICIENCY OPTIMIZATION OF INDUCTION MOTOR DRIVE USING LOSS MODEL CONTROL 
    S, Anil Chandrakanth (2012)
    Due to robustness, reliability, low price and maintenance free, induction motors (TMs) are used in most of the industrial applications. The influence of these motors (in terms of energy consumption) in energy intensive ...
  • INTER TURN FAULT ANALYSIS OF CAGE INDUCTION MOTOR 
    Kishan, Srikonda Hari (2012)
    Increasing interest: has been seen in condition monitoring techniques for rotating electrical machines in powea plants, because condition monitoring has the potential to reduce operating costs, enhance tlhhe reliability ...
  • PC BASED PROTECTIVE RELAYING FOR TRANSFORMERS 
    Kumar, Ajay (1999)
    The present, work aims at development of a percentage biased harmonic restrained- differential- protection using PC for a single phase power transformer. - The -protective Scheme, differential protection of power ...
  • AUTOMATED TEST EQUIPMENT FOR DYNAMIC TESTING OF PROTECTIVE RELAYS 
    Trivedi, Amitabh (1999)
    This dissertation work presents the design and development of a personal computer (IBM PC/ AT compatible) based scheme for testing protective relays. Precise and comprehensive testing of relay is essential to make sure ...
  • ERROR IDENTIFICATION AND STATE ESTIMATION IN POWER SYSTEM 
    Kumar, Brajendra (1999)
    This dissertation work describe WLS state estimation algorithm, decomposition approach of state estimation, Bad data detection and topological error identification. The algorithm is tested on IEEE-14 bus system. The ...
  • EVALUATION OF BIO KINETIC PARAMETERS FOR RATIONAL DESIGN OF ACTIVATED SLUDGE PROCESS FOR PHENOLIC WASTE 
    Dwived, Rajesh (1999)
    Phenols are a group of waste products which cause serious taste and odour problems in water. The major industries producing phenolic wastes are oil refineries, coke oven plants, steel plants etc. Acceptable discharge limits ...
  • DETECTION OF GENERATOR STATOR FAULTS. USING NEURO-FUZZY TECHNIQUE 
    Nema, Saurabh (2004)
    In this work, Neuro-Fuzzy Technique has been used for developing an algorithm for protection and monitoring of synchronous generator. The developed scheme consists, of two parts; these are (1) Simulation of various operating ...
  • DESIGN OF DAMPING CONTROLLER FOR SVC 
    Kuntumalla, Ramprasad (2004)
    In this work an attempt has been made to investigate the improvement of Small Signal Stability using SVC. For this purpose state space model for the 3 machine, 10 bus system is developed, in which a SVC has been installed ...
  • POWER SYSTEM STABILITY ENHANCEMENT USING PSS 
    Kumar, Dinesh (2004)
    A new type of Power System Stabilizer based on fuzzy set theory is proposed to improve the dynamic performance of a single machine power system. To have good damping characteristic over a wide range of operating conditions, ...
  • SYSTEM RELIABILITY STUDIES USING FUZZY LOGIC CONCEPTS 
    Ubnare, Virendra Kumar (2004)
    It is well known that the conventional reliability analysis using probabilities has been found to be inadequate to handle uncertainty of failure data and modeling. To overcome this problem the concept of fuzzy probability ...
  • DYNAMIC CONTROL OF ROBOTIC MANIPULATORS USING ARTIFICIAL NEURAL NETWORK 
    D., Prabu (2004)
    The aim of the thesis is to develop an efficient dynamic control such as point to point and continuous path control strategy for Robot manipulator using Artificial neural network (ANN) and Adaptive Neuro fuzzy inference ...
  • FEATURE EXTRACTION FROM ECG SIGNAL USING WAVELET TRANSFORMS 
    C., Jaya Krishna (2001)
    Wavelet Transforms are widely preferred for the analysis of non-stationary signals because of their property of multi-resolution analysis, thereby implying the analysis of the signal of different frequencies with different ...
  • ESTIMATION AND ANALYSIS OF HARMONICS IN POWER SYSTEM 
    Sivannarayana, S. (2000)
    A rapid increase in harmonic currents and voltages in the present AC systems due to large introduction of solid state switching devices. It is imperative to know the harmonic parameters such as magnitude and phase angles. ...
  • PERFORMANCE INVESTIGATIONS ON NON-SINUSOIDAL SUPPLY FED INDUCTION MACHINE DRIVE 
    Kishor, Kaushal (2000)
    Static converters have lead to a revolutionary change in the field of the induction motor control, These static converter devices produce such types of output which are rich in harmonics. The effect of these harmonics on, ...
  • ANALYSIS AND MANAGEMENT OF OPEN ACCESS POWER TRANSACTION BASED ON Al TECHNIQUES 
    Verma, Sunil (2000)
    The present scenario of power transmission in a power system is more or less flexible. Each alternative of open access to power transfer offers different solutions with both economic and secure operation. This thesis ...
  • GENERATION CAPACITY BIDDING UNDER FUZZY ENVIRONMENT 
    Ram, Sarab Deo (2000)
    Due to regulatory change in power demand at each hour, it becomes an important and highly complex to aid capacity of private or foreign producers. This thesis report_ has proposed a software tool to support the planning ...
  • ON-LINE CAPACITOR SWITCHING FOR DISTRIBUTION SYSTEM 
    Verma, Pradeep Kumar (2000)
    In this thesis, an artificial neural network based algorithm for determining optimal capacitor switching pattern for a given loading condition in a radial distribution system has been developed. Traditionally, combinatorial ...