Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/8074
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChittora, Ankur-
dc.date.accessioned2014-11-11T11:24:22Z-
dc.date.available2014-11-11T11:24:22Z-
dc.date.issued2011-
dc.identifierM.Techen_US
dc.identifier.urihttp://hdl.handle.net/123456789/8074-
dc.guideAgarwal, Pramoad-
dc.description.abstractIn the application, where input voltage does not differ from the output voltage, basic switched mode converters are to be used in the single input & single output with a common reference point. But in application where the input voltage is very high and output voltage is in very small fraction of input voltage, isolated ac to dc converters are developed in recent years. High frequency transformers are used for isolation. Aim to develop a Three Phase Isolated AC-DC Cuk converter which can compensate the harmonics produced by diode bridge rectifier. It also decreases input and output ripples. The control technique for isolated ac-dc cuk rectifier is such that it makes the input current sinusoidal and gives the almost unity power factor. Design equation are calculated for the converter. Hardware results and Simulation results - are tested for close loop control and results are shown. Performance investigation is done for the converteren_US
dc.language.isoenen_US
dc.subjectELECTRICAL ENGINEERINGen_US
dc.subjectTHREE PHASE ACen_US
dc.subjectDC CUK CONVERTERen_US
dc.subjectTHREE PHASE ISOLATED AC-DC CUK CONVERTERen_US
dc.titlePERFORMANCE INVESTIGATION OF THREE PHASE AC TO DC CUK CONVERTERen_US
dc.typeM.Tech Dessertationen_US
dc.accession.numberG21129en_US
Appears in Collections:MASTERS' THESES (Electrical Engg)

Files in This Item:
File Description SizeFormat 
EED G21129.pdf6.38 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.