Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/6088
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKumar, Amit-
dc.date.accessioned2014-10-11T11:19:49Z-
dc.date.available2014-10-11T11:19:49Z-
dc.date.issued1991-
dc.identifierM.Techen_US
dc.identifier.urihttp://hdl.handle.net/123456789/6088-
dc.guideKumar, Pradeep-
dc.description.abstractThis work was undertaken to compare several properties of Brass castings poured in V-Process and green sand molds. To minimize melting and heat treating variables, all molds of the above alloy were poured at the same temperature and all castings used for a given test were,heat treated in the same furnace. The data shows that 'V-Process' has excellent dimensional accuracy and high surface finish as compared to that of green sand molding. High volume porosity was obtained in case of green sand molding. High hardness and high tensile strength was obtained in green sand molding as compared to that of 'V-Process'. Significant difference was obtained in mean impact strength between both the processes. After heat treatment, the tensile strength, % elongation and hardness increase in both the cases but the % Increase in the above stated properties was not appreciableen_US
dc.language.isoenen_US
dc.subjectMECHANICAL & INDUSTRIAL ENGINEERINGen_US
dc.subjectBRASS CASTING STUDYen_US
dc.subjectV-PROCESS CASTINGen_US
dc.subjectGREEN SAND MOLDING METHODen_US
dc.titleCOMPARATIVE STUDY OF BRASS CASTINGS I PRODUCED BY V-PROCESS AND GREEN SAND MOLDING METHODen_US
dc.typeM.Tech Dessertationen_US
dc.accession.number246229en_US
Appears in Collections:MASTERS' THESES (MIED)

Files in This Item:
File Description SizeFormat 
246229ME.pdf3.58 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.