Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/5706
Title: JM CHLORIDE AS COAGULANT IN WATER TREATMENT
Authors: Singh, Laishram Gokulchandra
Keywords: CIVIL ENGINEERING;WATER TREATMENT;FERRIC CHLORIDE;OPTIMUM pH ZONE
Issue Date: 1988
Abstract: Efforts are being made to reduce or replace the conventional coagulant (aluminium sulphate) due to its increasing cost and reducing availability. Use of polyelectrolytes, ferric chloride, ferric sulphate and sodium aluminate in water treatment are the examples on which literature is available. An attempt has been made to study the use of aluminium chloride as a primary coagulant and its application has been compared with alum as primary coagulant on laboratory scale in wide range of turbidity and pH. The results revealed that aluminium chloride acts as a good coagulant over wide range of turbidity and pH and its requirement is 2.22 to 2.64 times less than that of alum in the optimum pH zone. Turbidity remo-val at the optimum dose of aluminium chloride is al-ways more than that by alum over wide range of turbi-dity and pH.
URI: http://hdl.handle.net/123456789/5706
Other Identifiers: M.Tech
Research Supervisor/ Guide: Srivastava, A. K.
Bhargava, Renu
metadata.dc.type: M.Tech Dessertation
Appears in Collections:MASTERS' THESES (Civil Engg)

Files in This Item:
File Description SizeFormat 
CED 179682.pdf2.39 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.