Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/4482
Title: PRE-BLEACHING OF MIXED-HARDWOOD PULP WITH SULFURIC ACID
Authors: Weley, Sidharth Dattu
Keywords: SULFURIC ACID;HARDWOOD;KAPPA;PAPER TECHNOLOGY
Issue Date: 2009
Abstract: The present report describes the experimental method and results of study conducted over mixed hardwood pulp by using sulfuric acid as a pre-bleaching stage. The pre-bleaching of mixed hardwood pulp resulted in more reduction of kappa number of unbleached pulp than oxygen-alkali delignified pulp at same dose of acid. The increase in dose reduces the viscosity.of both pulp below kappa number 8 or above the dose of 35 kg/t. there was minor change in tensile and burst strength of pulp, but the major, drop in tear strength was observed. The pulp was further bleached with DED stage and final pulp properties were observed with optimum dose of sulfuric acid. The final brightness obtained was 80% ISO at kappa factor 0.3 the pulp properties were not much affected.
URI: http://hdl.handle.net/123456789/4482
Other Identifiers: M.Tech
Research Supervisor/ Guide: Singh, S. P.
metadata.dc.type: M.Tech Dessertation
Appears in Collections:MASTERS' DISSERTATIONS (Paper Tech)

Files in This Item:
File Description SizeFormat 
PTDG20022.pdf1.16 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.