Please use this identifier to cite or link to this item:
http://localhost:8081/xmlui/handle/123456789/2820Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Angira, Vijay | - |
| dc.date.accessioned | 2014-09-29T06:44:35Z | - |
| dc.date.available | 2014-09-29T06:44:35Z | - |
| dc.date.issued | 1986 | - |
| dc.identifier | M.Tech | en_US |
| dc.identifier.uri | http://hdl.handle.net/123456789/2820 | - |
| dc.guide | Khare, M. K. | - |
| dc.description.abstract | The objective of this dissertation is to investigate the effect of drilling parameters on surface finish of the drilled hole in PVC, Perspex and Bakelite plastic materials. The drilling parameters are (i) Peripheral drill speed (V) (ii) Feed (F) (iii) Dia of drill(d) (iv) Point angle(G) The experimental design technique has been used and second order response surface equations have been developed for all the three plastic materials. Results are presented in graphical form also and an analysis of results is carried out. | en_US |
| dc.language.iso | en | en_US |
| dc.subject | MECHANICAL & INDUSTRIAL ENGINEERING | en_US |
| dc.subject | SURFACE FINISH | en_US |
| dc.subject | DRILLING PVC PERSPEX | en_US |
| dc.subject | BAKELITE SHEETS | en_US |
| dc.title | SOME INVESTIGATIONS ON THE SURFACE FINISH IN DRILLING OF PVC PERSPEX AND BAKELITE SHEETS | en_US |
| dc.type | M.Tech Dessertation | en_US |
| dc.accession.number | 179301 | en_US |
| Appears in Collections: | MASTERS' THESES (MIED) | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| MIED179301.pdf | 1.81 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.