1. Shodhbhagirathi @ IITR
  2. MECHANICAL & INDUSTRIAL ENGINEERING
  3. MASTERS' THESES (MIED)
Please use this identifier to cite or link to this item: http://localhost:8081/jspui/handle/123456789/2658
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSingh, Sarjeet-
dc.date.accessioned2014-09-28T11:35:20Z-
dc.date.available2014-09-28T11:35:20Z-
dc.date.issued1979-
dc.identifierM.Techen_US
dc.identifier.urihttp://hdl.handle.net/123456789/2658-
dc.guidePandey, P. C.-
dc.description.abstractIn this thesis, the limit widths of cut in turning have been determined at different spindle speeds, feeds, diameter, tool wear, over-hang, coolant. The results of this investigation indicate that there is considerable influence of the feed, speed,, diameter, tool wear on the limit width of cut. This aspect has to be taken into account in developing a comprehensive testing ~proc-edure in the dynamic acceptance test for .lathes,.en_US
dc.language.isoenen_US
dc.subjectMECHANICAL & INDUSTRIAL ENGINEERINGen_US
dc.subjectTURNINGen_US
dc.subjectLIMITING WIDTHen_US
dc.subjectFACTORS AFFECTINGen_US
dc.titleSTUDY OF THE FACTORS AFFECTING THE LIMITING WIDTH OF CUT IN TURNINGen_US
dc.typeM.Tech Dessertationen_US
dc.accession.number175905en_US
Appears in Collections:MASTERS' THESES (MIED)

Files in This Item:
File Description SizeFormat 
MIED175905.pdf2.61 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.