Please use this identifier to cite or link to this item:
http://localhost:8081/xmlui/handle/123456789/2658
Title: | STUDY OF THE FACTORS AFFECTING THE LIMITING WIDTH OF CUT IN TURNING |
Authors: | Singh, Sarjeet |
Keywords: | MECHANICAL & INDUSTRIAL ENGINEERING;TURNING;LIMITING WIDTH;FACTORS AFFECTING |
Issue Date: | 1979 |
Abstract: | In this thesis, the limit widths of cut in turning have been determined at different spindle speeds, feeds, diameter, tool wear, over-hang, coolant. The results of this investigation indicate that there is considerable influence of the feed, speed,, diameter, tool wear on the limit width of cut. This aspect has to be taken into account in developing a comprehensive testing ~proc-edure in the dynamic acceptance test for .lathes,. |
URI: | http://hdl.handle.net/123456789/2658 |
Other Identifiers: | M.Tech |
Research Supervisor/ Guide: | Pandey, P. C. |
metadata.dc.type: | M.Tech Dessertation |
Appears in Collections: | MASTERS' THESES (MIED) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
MIED175905.pdf | 2.61 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.