1. Shodhbhagirathi @ IITR
  2. MECHANICAL & INDUSTRIAL ENGINEERING
  3. MASTERS' THESES (MIED)
Please use this identifier to cite or link to this item: http://localhost:8081/jspui/handle/123456789/2574
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChincholiker, Shanker Rao-
dc.date.accessioned2014-09-28T07:08:00Z-
dc.date.available2014-09-28T07:08:00Z-
dc.date.issued1975-
dc.identifierM.Techen_US
dc.identifier.urihttp://hdl.handle.net/123456789/2574-
dc.guidePandey, P. C.-
dc.guideDalela, S.-
dc.description.abstractThe present work has been carried out to study the Influence of 1/d. ratio, lubricants and temperature on barreling,, during the free forging of commercial aluminium at slow speed. A now parameter Do - D (-- is defined as a measure of barreling which is ht quite realistic and free from ambiguity than one defined by Kulkarni at al ( 10) • ,also an attempt has been made to correlate the barreling parameter with the forging parameters. some of the interesting results like - ins tabili ty at even low strains . and l/d ratios ( with the application of lubricants ) f entrapment of oil film, the phape of the barred, were revealed in the present 0 work. It was also found that the temperature of 400 c ( Forging temperature ) has no significant effect on barre-ling.en_US
dc.language.isoenen_US
dc.subjectMECHANICAL & INDUSTRIAL ENGINEERINGen_US
dc.subjectBARRELINGen_US
dc.subjectFORGINGen_US
dc.subjectFORGING ALUMINIUMen_US
dc.titleSTUDY OF BARRELING IN FORGING OF ALUMINIUMen_US
dc.typeM.Tech Dessertationen_US
dc.accession.number108387en_US
Appears in Collections:MASTERS' THESES (MIED)

Files in This Item:
File Description SizeFormat 
MIED108387.pdf1.83 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.