1. Shodhbhagirathi @ IITR
  2. MECHANICAL & INDUSTRIAL ENGINEERING
  3. MASTERS' THESES (MIED)
Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/2510
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSinghal, Krishna Autar-
dc.date.accessioned2014-09-28T05:24:22Z-
dc.date.available2014-09-28T05:24:22Z-
dc.date.issued1973-
dc.identifierM.Techen_US
dc.identifier.urihttp://hdl.handle.net/123456789/2510-
dc.guideSingh, C. K.-
dc.description.abstractBurnishing is a process of finishing metal by compressing its outer surface layer by the application of highly polished and hardened tool. Burnishing, being an application of cold working process, improves the surface finish and hardness of the metal components. The facts already reported are mainly on the burnishing process employing a diamond tip tool. Literature survey revealed the data on the burnishing with diamond point tool and no data on burnishing with hard steel tool have been observed. An attempt has therefore been made to explore the suitability of hardened and finished steel balls on structural mild steel work material adopting such variables as speed, feed, load and ball diameter.en_US
dc.language.isoenen_US
dc.subjectMECHANICAL & INDUSTRIAL ENGINEERINGen_US
dc.subjectBURNISHING PROCESSen_US
dc.subjectSURFACE FINISHen_US
dc.subjectHARDNESSen_US
dc.titleINVESTIGATIONS ON THE IMPROVEMENT OF SURFACE FINISH AND HARDNESS OF THE WORK MATERIAL WITH BURNISHING PROCESSen_US
dc.typeM.Tech Dessertationen_US
dc.accession.number107608en_US
Appears in Collections:MASTERS' THESES (MIED)

Files in This Item:
File Description SizeFormat 
MIED107608.pdf3.72 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.