STUDY AND ANALYSIS OF TRAVELLING WIRE ELECTROCHEMICAL SPARK MACHINING

Please use this identifier to cite or link to this item: http://localhost:8081/jspui/handle/123456789/16875

Full metadata record

DC Field	Value	Language
dc.contributor.author	Bharati, Satya Prakash	-
dc.date.accessioned	2025-06-20T12:41:41Z	-
dc.date.available	2025-06-20T12:41:41Z	-
dc.date.issued	2015-05	-
dc.identifier.uri	http://localhost:8081/jspui/handle/123456789/16875	-
dc.description.abstract	Travelling Wire-ECSM can be used for machining the insulating material on large scale. OFAT (one-factor-at-a-time) technique is used to perform experiments on TW-ECSM setup. Effective combination of maximum MRR and better surface finish is subject of concern. If MRR is high than surface finish will be low so by optimizing the parameters we can get optimum MRR and good surface finish. There are several parameters like applied voltage, electrolyte concentration, - electrode distance, and feed rate etc. on which MRR and surface finish depends	en_US
dc.description.sponsorship	INDIAN INSTITUTE OF TECHNOLOGY ROORKEE	en_US
dc.language.iso	en	en_US
dc.publisher	IIT ROORKEE	en_US
dc.subject	Travelling Wire-ECSM	en_US
dc.subject	One-Factor-At-A-Time Technique	en_US
dc.subject	TW-ECSM Setup	en_US
dc.subject	Electrolyte Concentration	en_US
dc.title	STUDY AND ANALYSIS OF TRAVELLING WIRE ELECTROCHEMICAL SPARK MACHINING	en_US
dc.type	Other	en_US
Appears in Collections:	MASTERS' THESES (MIED)

Files in This Item:

File	Description	Size	Format
G25488.pdf		6.97 MB	Adobe PDF	View/Open