Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/15171
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMurari, Krishna-
dc.date.accessioned2021-11-23T06:20:31Z-
dc.date.available2021-11-23T06:20:31Z-
dc.date.issued2019-07-
dc.identifier.urihttp://localhost:8081/xmlui/handle/123456789/15171-
dc.guidePadhy, Narayana Prasad-
dc.description.abstractIn the late 1880s, two exceptionally brilliant inventors, Nikola Tesla and Thomas Edison embroiled in a battle for establishing the preeminence of alternating current (AC) and direct current (DC) systems respectively. But due to the numerous advantages of AC over DC during that period, the latter was forced out of the competition and AC emerged victorious. Since then, AC system has dominated all the relevant field (viz. generation, transmission and distribution) of the power system. However, with the recent developments in the area of power electronic devices and renewable energy technologies, interest in DC system is revoked. In areas such as long distance transmission, energy storage systems etc., DC has undoubtedly proved its edge over the AC system. Power generation, for which AC was considered to be superior to DC, is now inclining towards DC due to deployment of renewable energy technologies. On the load side of the power system, electronic loads have significantly increased in recent times. The result is a tremendous increase in DC power consuming devices. In the current scenario, there are various advantages of DC over AC system, but the complete reinforcement of existing distribution system into DC seems to be impossible at this stage. The reason is, the existing distribution systems is mostly AC. So researchers are planning a hybrid distribution system (AC-DC distribution system) with both AC and DC grids. For proper planning, analysis and optimal operation of transmission or distribution system, a power flow or load flow study has to be carried out. Therefore, power-flow/loadflow algorithm for AC-DC distribution system is highly required. However, load flow in such systems is a challenging task due to non linear characteristics of power converters. There are well established algorithms for load flow solution of AC transmission systems, AC-DC transmission systems and for AC distribution systems but for AC-DC distribution systems till date not much work has been reported. The proposed work aims for the development of a load flow algorithm for AC-DC distribution network To acquire the theme objective of this thesis, firstly a power flow algorithm for AC distribution system has been developed utilising the concept of graph theory and matrix algebra. The developed load flow methodology is capable of handling any kind of AC ii distribution network viz. radial, meshed, single phase and three phase distribution network. It requires the conventional bus-branch oriented data as the only input. Seven developed matrices, loads beyond branch matrix (LB), load current matrix (LC), feeder current matrix (FC), path impedance matrix (PI), path drop matrix (PD), slack bus to other buses drop matrix (SBOBD), load flow matrix (LFM) and simple matrix operations are utilized to obtain load flow solutions. In contrast with traditional load flow methods for HVDC systems, the proposed technique does not require any lower upper (LU) decomposition, matrix inversion and forward-backward substitution of Jacobian matrix. Because of the aforementioned reasons, the developed technique is computationally efficient. In case of meshed &/or ring network they should be converted to equivalent radial network by breaking the loops. The loop breakpoint matrix/sensitivity matrix has been derived to calculate the net breakpoint injection to mimic the effect of meshed network in the radial scenario. Thus equivalent radial network will have to take into account the loop breakpoint injection. The additional breakpoint injections are reflected in the LB or LC matrix. Once, the meshed network is converted to radial network, the relevant matrices formulation and load flow procedure are carried out in same manner as the radial distribution network. For three phase unbalanced distribution network, the relevant matrices has been modified as per three phase scenario. The effectiveness of the proposed solution methodology has been tested on several standard distribution systems. Test outcome reveal efficiency and authenticity of the proposed research work. Subsequently, the developed load flow algorithm has been further extended for solving the load flow problem of AC distribution network with various model of distributed generations. The mathematical model of DG considered as PQ and PV buses are incorporated into the proposed algorithm to imitate the injection of DGs in the distribution systems. The power injected by the DG need to be reflected in the LB matrix of the distribution network. For the PV type buses or distributed generators, the reactive power generation is adjusted between the maximum and minimum limits in order to maintain the constant voltage and constant real power (injected) at the PV bus. The breakpoint matrix has been utilized to obtain the additional reactive power injection/withdrawal to maintain the specified voltage at each PV nodes. In the case of weakly meshed distribution network with PV type distributed generations, the loop breakpoint injections and PV breakpoint injections have been calculated iii simultaneously. The net injections is reflected in the LB or LC matrix of the distribution network. Note that except for some modifications needed to be done for the LC or LB matrices, the proposed solution techniques require no modification; therefore, the proposed method can obtain the load-flow solution for AC distribution system in the presence of distributed generations efficiently. The remaining supporting matrices will reshape themselves accordingly. The effectiveness of the proposed algorithm has been tested on several standard distribution systems. Test outcome reveal viability and accuracy of the proposed research work. The AC load flow algorithm developed in this thesis work has been modified in a manner such that it can easily be extended for load flow calculation of AC-DC radial distribution systems with distributed generations. For our purpose, the AC-DC distribution network has been subdivided into a number of sub-distribution systems or sub-regions depending on number of bus-bus interfacing converters present in the distribution system. Each sub-region will act as separate distribution system. These regions or sub distribution systems can be interconnected in different hybrid configuration. The relevant matrices formulation as discussed above has to be carried out for each sub-region separately. The per unit equivalent model of three-phase PWM AC/DC converter, PWM DC-DC converter and three-phase AC-DC LCC converter have been proposed in this section. The mathematical model of DGs considered as P, PQ, PV and Vdc buses are incorporated into the proposed algorithm to imitate the injection of DGs in the AC-DC distribution systems. The power injected by the DG need to be reflected in the 𝐿𝐡𝑔 or 𝐿𝐢𝑔 matrix of the AC-DC distribution network. The sensitivity or breakpoint matrix has been utilized to obtain the additional reactive power injection/withdrawal to maintain the specified voltage at each PV nodes. Similarly, when Vdc nodes are present in DC regions of an AC-DC distribution network, the correct amount of active power injection by the generation units is calculated to compensate the variance between obtained and specified voltage. The Vdc sensitivity or breakpoint matrix has been utilized to obtain the additional real power injection/withdrawal to maintain the specified voltage at each Vdc nodes. Once the net injection by the DGs is calculated, the load flow solution of active distribution system will be carried out in the same manner as load flow solution of distribution system without DGs. iv Subsequently, the developed load flow algorithm has been further extended for solving the load flow problem of AC-DC meshed distribution network with various model of distributed generations. There can exist three kinds of meshes in an AC-DC distribution network. (a) Mesh consisting of only AC buses in an AC sub-region is called as type 1 mesh. (b) Mesh consisting of only DC buses in a DC sub-region is called as type 2 mesh. (c) Mesh consisting of both AC and DC buses or only DC buses with different voltage levels are called as type 3 mesh. The procedure for calculating injected current/injected power will be different for the different meshed configurations. Suitable procedure has been developed for calculating the loop breakpoint injections for these three kind of loops in the AC-DC distribution network. The additional breakpoint injections are reflected in the 𝐿𝐡𝑔 or 𝐿𝐢𝑔 matrix (as per the injected quantity calculated). Once, the meshed AC-DC network is converted to its equivalent radial network, the relevant matrices formulation and load flow procedure are carried out in same manner as the radial AC-DC distribution network. In the case of weakly meshed distribution network with PV and Vdc type distributed generations, the loop breakpoint injections and PV breakpoint injections have been calculated simultaneously. Test results signifies the efficacy and accuracy of the developed load flow algorithm. In order to prove the applicability of the load flow algorithm, a power flow based Distribution use of systems (DUoS) charging methodology has been developed to investigate the impact of protection system reinforcement costs on the consumers associated with renewable integrated distribution network. Conventional distribution network is a radial network with a single power source. Usually overcurrent protection schemes are employed for such system protection for their simplicity and low-cost. With the introduction of renewable generations, the existing protection coordination needs to be upgraded. Provision of directional feature and the requirement of high capacity circuit-breakers at certain points for the protection scheme demands considerable investment. The renovation cost required for upgrading the protection scheme will significantly impact the network cost requirement and consequently distribution use of system (DUoS) charges. This thesis works also aims to investigate the impact of renewable generations on the DUoS charges considering the cost associated in revamping the protection scheme. A power flow based MW+MVAr-Miles v DUoS charging method, that considers used capacity of the network, is proposed to carry out the DUoS charging calculations. The proposed charging mechanism appraise/penalise the users in accordance they are affecting system power factor. Accordingly, the proposed pricing algorithm may encourage users to act based on the economic signal generated at each location. The proposed charging algorithm has been tested on various standard systems to examine the impact of renewable generations on the use of network costs.en_US
dc.description.sponsorshipIndian Institute of Technology Roorkeeen_US
dc.language.isoenen_US
dc.publisherI.I.T Roorkeeen_US
dc.subjectDirect Current (DC)en_US
dc.subjectAlternating Current (AC)en_US
dc.subjectPoweren_US
dc.subjectDistribution Networken_US
dc.titleAC-DC LOAD FLOW ANALYSIS FOR DISTRIBUTION SYSTEMS WITH RENEWABLE GENERATIONSen_US
dc.typeThesisen_US
dc.accession.numberG28723en_US
Appears in Collections:DOCTORAL THESES (Electrical Engg)

Files in This Item:
File Description SizeFormat 
G28723.pdf10.42 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.