Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/12511
Title: MICROPROCESSOR BASED SCOUR MEASUREMENT
Authors: Srinath, N. K.
Keywords: ELECTRICAL ENGINEERING
MICROPROCESSOR BASED SCOUR MEASUREMENT
MICROPROCESSOR
SCOUR MEASUREMENT
Issue Date: 1986
Abstract: The detachment of bed material and lowering of bed, known as scour, is being studied in hydraulics section of Civil Engineering Department. To study the rate of scour, profile indicator is being used. The data from the profile bed indicator is being recorded on graph through graphical plotter. This graphical plotter is very slow. For further calculations, this graphical value is converted into decimal value which is strenuous. Moreover many readings are nece-ssary in •the first few seconds to record scour accurately. To avoid the sluggishness and the strain to read data from graph, an attempt is made in this dissertation to read data from profile indicator and T)rint the decimal value uito third decimal much faster. A single channel :ADC interface and a parallel printer interface have been developed for the purpose. In the continuous mode of recording data., about 7 readings/second rate has been achieved. Chapter-1 deals with the simulated model and the instru-ment to convert the scour value into analog eruivalent, profile indicator.
URI: http://hdl.handle.net/123456789/12511
Other Identifiers: M.Tech
Appears in Collections:MASTERS' DISSERTATIONS (Electrical Engg)

Files in This Item:
File Description SizeFormat 
EED178914.pdf5.78 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.