1. Shodhbhagirathi @ IITR
  2. MECHANICAL & INDUSTRIAL ENGINEERING
  3. MASTERS' THESES (MIED)
Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/10533
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKumar, Rinku-
dc.date.accessioned2014-11-24T07:58:03Z-
dc.date.available2014-11-24T07:58:03Z-
dc.date.issued2010-
dc.identifierM.Techen_US
dc.identifier.urihttp://hdl.handle.net/123456789/10533-
dc.guideTariq, Andalib-
dc.guideDutta, Sushanta-
dc.description.abstractThe study of flow characteristics behind surface mounted rib tarbuletors inside a rectangular duct have been studied using particle image velocimetry technique. The objective behind this study is to understand the flow structure responsible for heat transfer or heat mixing enhancement. The aspect ratio of rectangular duct is 1:4. Reynolds number is taken 11000 and 22000 on the basis of hydraulic diameter of the duct. Chamfered solid ribs having chamfering angle 0, 5, 10, 15 and 20 degrees are used in this study to investigate the flow structures and to give the comparable result of all. The results obtained show strong effect of chamfering the rib on flow structure. Investigation of flow field in case of array of ribs with zero and 20 degree have been also. done. It has been seen in result that 15 degree chamfered rib shows much more favourable result than other.en_US
dc.language.isoenen_US
dc.subjectMECHANICAL INDUSTRIAL ENGINEERINGen_US
dc.subjectSURFACE MOUNTED RIB TURBULATORSen_US
dc.subjectRECTANGULAR DUCTen_US
dc.subjectPIVen_US
dc.titleSTUDY OF FLOW FIELD BEHIND SURFACE MOUNTED RIB TURBULATORS INSIDE A RECTANGULAR DUCT USING PIVen_US
dc.typeM.Tech Dessertationen_US
dc.accession.numberG20374en_US
Appears in Collections:MASTERS' THESES (MIED)

Files in This Item:
File Description SizeFormat 
MIEDG20374.pdf13.46 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.