1. Shodhbhagirathi @ IITR
  2. MECHANICAL & INDUSTRIAL ENGINEERING
  3. MASTERS' THESES (MIED)
Please use this identifier to cite or link to this item: http://localhost:8081/xmlui/handle/123456789/10100
Full metadata record
DC FieldValueLanguage
dc.contributor.authorVijayvargiya, P. N.-
dc.date.accessioned2014-11-22T10:58:54Z-
dc.date.available2014-11-22T10:58:54Z-
dc.date.issued1970-
dc.identifierM.Techen_US
dc.identifier.urihttp://hdl.handle.net/123456789/10100-
dc.guidePanday, P. C.-
dc.description.abstractThe current rk reports the development of a, theory enabling us to predict the cutting forces in horizontal and vertical milling. The theory employs the shear angle relationship for variable underformed chip thickness cutting. The theoretical results have compared with the experimental values and a good agreement between the theoretical and experimental values has been observed. The forces were measured using a strain gauge type dynamometer as reported by Sabberwal and Koeingnsbergeren_US
dc.language.isoenen_US
dc.subjectMECHANICAL INDUSTRIAL ENGINEERINGen_US
dc.subjectCUTTING FORCESen_US
dc.subjectMILLINGen_US
dc.subjectSTRAIN GAUGE TYPE DYNAMOMETERen_US
dc.titleANALYSIS OF CUTTING FORCES IN MILLINGen_US
dc.typeM.Tech Dessertationen_US
dc.accession.number106548en_US
Appears in Collections:MASTERS' THESES (MIED)

Files in This Item:
File Description SizeFormat 
MIED106548.pdf3.2 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.